GearWrench Jack Stand Set GWJS2T 2 Ton Capacity Steel Hoist Pair (Double Lock Pin Ductile Iron Bar ASME PASE-2019 Auto Vehicle Underbody Repair)
Couldn't load pickup availability
GEARWRENCH GWJS2T 2-Ton Heavy-Duty Ratcheting Jack Stands with Double Lock Pin (2-Pack)
The GEARWRENCH GWJS2T 2-ton heavy-duty ratcheting jack stand set provides secure, rigid elevation support for passenger sedans, compact coupes, and light crossovers with a combined 4,000-pound load capacity and an 11.25-inch to 17-inch height range. Engineered with a precision-cast multi-tooth ductile iron ratcheting bar and an integrated high-tensile steel double-lock security pin, this compact vehicle support pair delivers dual-layer mechanical protection against accidental disengagement during underbody servicing. Outfitted with wide contoured support saddles to grip unibody pinch welds and frame rails, broad welded foot pads to disperse weight across garage floors, a high-visibility molten orange powder coat finish, and full ASME PASE-2019 safety certifications, it equips automotive technicians and garage specialists with dependable lifting stability.
Best Used For:
- Passenger Car Tire Rotations and Brake Servicing: Supporting compact cars and sedans securely at wheel-off heights for pad, rotor, and caliper replacements.
- Underbody Oil Changes and Exhaust Maintenance: Providing safe, stable working clearance beneath unibody chassis frames during exhaust repair and drivetrain fluid services.
- Seasonal Vehicle Storage and Suspension Unloading: Keeping classic cars, sports coupes, and track vehicles elevated to prevent tire flat-spotting and relieve suspension bushing tension.
Key Performance & Safety Features
- Double-Lock Security Pin Failsafe: Tethered heavy-duty steel safety pin passes directly through the ductile iron column, adding a vital secondary mechanical lock.
- Ductile Iron Ratcheting Mast: Multi-tooth cast column allows smooth, self-locking elevation adjustments with high shear resistance under vehicle loads.
- Wide-Stance Welded Foot Pads: Large welded pyramid base feet distribute 4,000 lbs evenly across concrete surfaces to prevent sinking and floor damage.
- Contoured Frame Saddle: Broad concave saddle geometry securely cradles unibody pinch welds, subframe rails, and circular axle tubes without slipping.
- ASME PASE-2019 Certified: Validated to meet rigorous North American safety and performance standards for portable automotive service equipment.
- Molten Orange Powder Coating: High-visibility chemical-resistant finish provides instant identification in dark bays while resisting oil, brake fluid, and rust.
What's Included
- (2) GEARWRENCH 2-Ton Heavy-Duty Ratcheting Jack Stands (GWJS2T)
- (2) Tethered High-Tensile Steel Double-Lock Security Pins
- (1) Safety Operation and Inspection Guide
Technical Specifications
| Manufacturer Brand | GEARWRENCH (Apex Tool Group) |
| Model Part Number | GWJS2T |
| Equipment Product Category | Ratcheting Automotive Support Jack Stands |
| Rated Lifting Capacity (Pair) | 2.00 Tons (4,000 lbs / 1,814.37 kg Combined) |
| Minimum Supporting Height | 11.250 Inches (285.75 mm Lowest Elevation) |
| Maximum Supporting Height | 17.000 Inches (431.80 mm Maximum Extension) |
| Ratcheting Column Material | Heavy-Duty Multi-Tooth Cast Ductile Iron |
| Chassis Base Metallurgy | High-Strength Welded Forged Carbon Steel |
| Secondary Locking Mechanism | Tethered Heavy-Duty Steel Double-Lock Pin |
| Base Footprint Dimensions | 7.60 in. Length x 7.10 in. Width (Per Stand) |
| Total Net Set Weight | 11.00 lbs (176.00 oz / 4.99 kg) |
| Safety Standard Compliance | ASME PASE-2019 Certified Safety Standard |
| Package Pack Quantity | 2 Jack Stands per Matched Pair Set |
| Suitable for material type | Unibody Pinch Welds, Subframe Rails, & Solid Steel Axles |
Pro-Tip: After raising the ductile iron ratcheting mast to your desired notch under the vehicle pinch weld, always slide the tethered double-lock steel pin fully through the collar opening before slowly lowering hydraulic floor jack pressure.