Heatstar Forced Air Heater HS210KT 210000 BTU Multi Fuel (14 Gallon Tank 9.5 Hour Run Time Thermostat Pneumatic Wheels Heats 6000 Sq Ft)

Heatstar HS210KT 210,000 BTU Multi-Fuel Forced Air Kerosene Heater

The Heatstar HS210KT 210,000 BTU Multi-Fuel Forced Air Kerosene Heater is an industrial portable space heating unit engineered for curing concrete, drying drywall compound, and warming unheated construction enclosures up to 6,000 square feet. Operating at a 400 CFM airflow rate with a 115V / 20A continuous ignition system, this commercial heater features a integrated 14-gallon fuel tank delivering up to 9.5 hours of continuous operation per fill. Outfitted with an automatic factory-installed thermostat, multi-fuel compatibility for Kerosene, Diesel, and Fuel Oil, a Cad Cell flame-out safety shutoff, an overheat limit switch, and a heavy-duty wheel kit with pneumatic tires, this 60.55-pound unit executes jobsite thermal management.

Best Used For:

• Commercial Construction Shell Heating: Warming ventilated open framing, masonry structures, and jobsite enclosures up to 6,000 square feet during winter.
• Drywall Curing & Concrete Protection: Maintaining ambient temperatures to accelerate drywall mud drying and prevent concrete slab freezing.
• Industrial Warehouse & Workshop Space Heating: Providing temporary supplementary heat in high-ceiling equipment bays and ventilated maintenance shops.

Key Performance & Safety Features

• 210,000 BTU High-Output Burner: Produces 210,000 BTUs per hour with a 400 CFM fan to circulate warm air rapidly across 6,000 sq. ft. spaces.
• Multi-Fuel Combustion Engine: Runs efficiently on K1/K2 Kerosene, Diesel #1/#2, Home Heating Oil, and Jet A/JP-8 fuels.
• 14-Gallon High-Capacity Fuel Tank: Extended fuel reservoir provides approximately 9.5 hours of continuous heating on a single fill.
• Integrated Automatic Thermostat Control: Regulates burner cycles automatically to maintain target jobsite temperatures and reduce fuel consumption.
• Cad Cell & High-Limit Safety Shutoff: Photoelectric Cad Cell monitors flame presence while thermal limit switches prevent system overheating.
• Heavy-Duty Jobsite Mobility Kit: Tubular steel handles and pneumatic rubber tires maneuver easily over rough dirt and gravel terrain.

What's Included

• (1) Heatstar HS210KT 210,000 BTU Multi-Fuel Forced Air Kerosene Heater
• (1) Heavy-Duty Wheel Kit with Pneumatic Rubber Tires
• (1) Powder-Coated Steel Frame Handle Assembly

Technical Specifications

Pro-Tip: Always operate forced air kerosene heaters in well-ventilated construction spaces to ensure adequate oxygen supply, and use 1-K kerosene during freezing weather to prevent fuel gelling and nozzle clogging.