Husqvarna Diamond Core Drill Bit 595026801 1.5 Inch Elite B1425 (24 Inch Tube 1-1/4-7 Thread Laser Welded Flint Reinforced Concrete Masonry Wet)

Husqvarna 595026801 1.5 Inch x 24 Inch B1425 Elite-Drill Diamond Core Bit

The Husqvarna 595026801 is a 1.5-inch overall diameter wet diamond core drill bit engineered to execute continuous deep utility penetrations through hard flint concrete, chert, rebar-embedded structural slabs, and reinforced masonry. Built with an extended 24-inch steel core barrel, this Gold-level B1425 Elite-Drill series tool incorporates laser-welded diamond segments with a 0.300-inch segment height to facilitate rapid bit centering and eliminate cutter glazing in ultra-hard aggregates. Equipped with a standard 1-1/4-inch - 7 threaded hub connection, it operates under continuous water cooling with commercial core drill rigs, delivering straight core extractions for electrical conduit runs, small plumbing lines, and heavy-duty structural anchor installations without barrel extensions.

Best Used For:

• Flint & Hard Aggregate Concrete Drilling: Penetrating steel-reinforced poured concrete containing hard flint, chert, and high-PSI aggregate without matrix glazing.
• Electrical Conduit & Anchor Bolt Penetrations: Boring precise 1.5-inch clearance holes through thick concrete foundation walls and floor slabs for commercial wiring and mechanical anchors.
• Deep Wall & Slab Core Extractions: Completing continuous 24-inch deep core extraction passes in structural masonry and retaining walls in a single setup.

Key Performance & Safety Features

• Extended 24-Inch Core Barrel Depth: Extended tube capacity eliminates the need for bit extension rods during thick wall and foundation coring operations.
• B1425 Elite-Drill Diamond Matrix: Gold performance level bond matrix designed specifically to maintain sharp cutting action in flint and hard aggregates.
• Laser-Welded Diamond Segments: High-integrity laser welding joins diamond cutting segments directly to the steel barrel for maximum safety under high stress.
• 0.300-Inch Segment Height: Specialized segment profile provides consistent cutting speed, rapid hole starts, and extended wear life.
• Standard 1-1/4"-7 Threaded Hub: Universal female thread connection fits directly onto standard commercial core drilling rig spindles.
• Wet-Only Coolant Circulation: Formulated for continuous water flow to flush slurry, prevent bit binding, and maintain cool segment temperatures.

What's Included

• (1) Husqvarna 595026801 1.5" x 24" B1425 Elite-Drill Diamond Core Bit

Technical Specifications

Pro-Tip: Maintain high water flow pressure when wet coring 1.5-inch penetrations through dense flint concrete to continuously flush slurry out of the 24-inch tube and prevent barrel binding.