Husqvarna 14" Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5" Cutting Depth for Block and Brick Cutting
Husqvarna 14" Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5" Cutting Depth for Block and Brick Cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda engine and 5 Inch cutting depth for brick and paver cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Cutting Depth for Brick and Block
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Cutting Depth for Brick and Block Cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Cutting Depth for Brick and Paver Cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Wet Cutting Depth for Brick and Paver
Husqvarna 14" Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5" Cutting Depth for Block and Brick Cutting
Husqvarna 14" Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5" Cutting Depth for Block and Brick Cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda engine and 5 Inch cutting depth for brick and paver cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Cutting Depth for Brick and Block
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Cutting Depth for Brick and Block Cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Cutting Depth for Brick and Paver Cutting
Husqvarna 14 Inch Gas Masonry Saw MS360G with 4.8 HP Honda Engine and 5 Inch Wet Cutting Depth for Brick and Paver
Husqvarna

Husqvarna Gas Masonry Saw MS360G 14 Inch (4.8 HP Honda GX Engine 5 Inch Cut Depth 3100 RPM Wet Cutting Block Brick Paver Table Saw)

Only 1 left
SKU: MS360G
$4,400.00 USD

Description

Husqvarna Logo logout

Husqvarna MS360G 14-Inch 4.8 HP Gas-Powered Wet Masonry Saw

The Husqvarna MS360G 14-Inch 4.8 HP Gas-Powered Wet Masonry Saw is an industrial portable table saw engineered to execute high-torque wet cuts through concrete blocks, clay bricks, retaining wall units, and pavers. Powered by a 4.8 HP Honda GX engine operating at a maximum blade speed of 3,100 RPM with a 1-inch arbor, this heavy-duty table cutter delivers a 5-inch maximum cutting depth and a 15-inch maximum rip length using a 14-inch diamond blade. Equipped with a Sta-Level blade guard, a spring-assisted plunge head, an integrated submersible water pump system, and telescoping handles, this 170-pound gas saw solves slurry spray, blade misalignment, and deep block cutting challenges on commercial masonry jobsites.

Best Used For:

  • Commercial Cinder Block & CMU Trimming: Executing deep 5-inch single-pass cuts through standard 8-inch concrete masonry units and structural block.
  • Brick & Interlocking Paver Slicing: Ripping straight, parallel cuts up to 15 inches long across dense clay bricks and concrete driveway pavers.
  • Jobsite Plunge & Step-Cut Masonry Work: Performing controlled plunge cuts into stone blocks and precast wall caps using the spring-assisted cutting head.

Key Performance & Safety Features

  • 4.8 HP Honda GX Four-Stroke Engine: Industrial recoil-start gas engine provides consistent, high-torque power without needing electrical generators.
  • Sta-Level Parallel Blade Guard: Keeps the blade guard strictly parallel to the cutting cart throughout the stroke to enhance cut accuracy and safety.
  • Patented Water Containment System: Submersible pump and double splash guard direct water stream to the blade while containing slurry runoff.
  • Spring-Assisted Plunge Head: Counterbalanced cutting head enables smooth, controlled plunge cutting into thick stone and precast block.
  • Low-Vibration Structural Chassis: Heavy-duty frame absorbs engine harmonics to reduce operator fatigue and prolong diamond blade lifespan.
  • Integrated Telescopic Transport Handles: Dual pull-out handles allow two crew members to maneuver, load, and position the 170-lb machine easily.

What's Included

  • (1) Husqvarna MS360G 14 in. Gas-Powered Masonry Saw
  • (1) 14 in. Segmented Diamond Blade
  • (1) Submersible Electric Water Pump System
  • (1) Removable Water Pan & Splash Guard Assembly
  • (1) Precision Rip Guide Attachment
  • (1) Operator's Instruction Manual

Technical Specifications

Manufacturer Brand Husqvarna Construction
Model Part Number (OEM) MS360G (967318201)
Primary Power Source Gasoline (Honda GX160 4-Stroke)
Engine Power Output 4.8 HP (3.6 kW)
Maximum Blade Diameter 14.0 in. (355.6 mm)
Maximum Depth of Cut 5.0 in. (127.0 mm)
Maximum Length of Cut 15.0 in. (381.0 mm)
Maximum Blade Speed 3,100 RPM
Arbor Shaft Diameter 1.0 in. (25.4 mm)
Cooling & Cutting Method Wet Cutting (Integrated Pump)
Engine Ignition / Starting System Manual Recoil Pull-Starter
Total Machine Net Weight 170 lbs (77.1 kg)
Overall Machine Dimensions 37-1/2 in. Length x 27.5 in. Width
Pro-Tip: Drain and flush the water pan and submersible pump with clean water after finishing daily wet-cutting operations to prevent abrasive masonry slurry from hardening inside the pump impeller.