Husqvarna Diamond Core Drill Bit B1410 5/8 Inch Elite Drill 593248101 (5/8 11 Threaded Hub Wet Drilling Concrete Masonry Hole Sawing)

Husqvarna 593248101 Elite-Drill B1410 5/8-Inch Diamond Core Drill Bit

The Husqvarna 593248101 Elite-Drill B1410 is a 5/8-inch diameter wet diamond core drill bit engineered to penetrate reinforced concrete, brick, stone, and structural masonry without bit binding or core jams. Manufactured with a standard 5/8-inch-11 threaded connection and high-concentration gold-level diamond segments, this thin-wall coring tool optimizes water circulation to flush slurry and control heat buildup. Designed for use with handheld core drills and stationary drill rigs, it provides smooth pilot entry, low vibration rates, and high penetration speeds across heavy commercial electrical, plumbing, and mechanical installations.

Best Used For:

• Commercial Conduit & Utility Anchor Penetrations: Boring clean 5/8-inch clearance holes through poured concrete floors and tilt-up walls for electrical conduits and heavy structural anchors.
• Plumbing & Mechanical Wall Core Drilling: Coring precise passages through solid brick, block, and stone walls for water supply lines and copper piping runs.
• Reinforced Concrete Coring Applications: Cutting continuously through steel rebar gridwork embedded inside concrete slabs using pressurized water feed equipment.

Key Performance & Safety Features

• Gold-Level Segment Formulations: High-density matrix bond packed with synthetic diamonds delivers maximum cutting velocity and high wear resistance.
• Wet Drilling Fluid Geometry: Engineered thin-wall barrel facilitates constant water circulation to cool matrix segments and flush slurry out of deep cuts.
• Standard 5/8"-11 Threaded Hub: Universal female thread connection directly interfaces with standard handheld core motors and stationary drill stands.
• Reduced Vibration Segment Arc: Specialized segment geometry reduces initial chattering to ensure easy pilot starts and precise hole centering.
• Thin-Wall Tube Engineering: Reduced core wall displacement lowers drag friction, requiring less feed force pressure from the rig operator.

What's Included

• (1) Husqvarna Elite-Drill B1410 5/8" Diamond Core Drill Bit (Model 593248101)

Technical Specifications

Pro-Tip: Always maintain adequate water flow pressure when drilling with small 5/8-inch diamond core bits to prevent slurry accumulation inside the thin-wall barrel, protecting the diamond segments from heat glaze.