Husqvarna Core Drill Bit 596242702 5/8 Inch Elite B1420 (5/8 11 Threaded Hub Continuous Crown Wet Concrete Rebar Masonry Hole Coring)

Husqvarna 596242702 Elite-Drill B1420 5/8-Inch Diamond Crown Core Drill Bit

The Husqvarna 596242702 Elite-Drill B1420 is a 5/8-inch diameter by 14-inch core length wet diamond crown core drill bit engineered to penetrate flint-hard cured concrete, heavy steel rebar reinforcement, aggregate stone, and structural masonry without bit wandering or chatter. Formulated with a continuous crown segment measuring 2/5-inch (0.4-inch) in height by 1/8-inch (0.125-inch) in width, this gold-tier coring tool optimizes pressurized water flow to cool the continuous diamond edge and flush slurry out of deep cuts. Built for use with handheld core drills or rig stands operating within a 2 hp to 5 hp power range via its standard 5/8-inch-11 threaded connection, it provides smooth pilot entry, reduced rotational friction, and rapid penetration across commercial plumbing, electrical, and anchor installations.

Best Used For:

• Precision Structural Anchor & Fastener Drilling: Coring exact 5/8-inch clearance passages through high-PSI reinforced concrete for threaded rod drop-in anchors and heavy mechanical fasteners.
• Heavy Rebar & Flint-Hard Aggregate Coring: Slicing cleanly through embedded structural steel rebar gridwork inside poured concrete walls, floor slabs, and masonry structures.
• High-Speed Wet Coring Operations: Operating under continuous pressurized water delivery using 2 hp to 5 hp core motors to prevent segment glazing and maintain high cutting speeds.

Key Performance & Safety Features

• Continuous Crown Rim Architecture: Continuous segment profile provides stable, chatter-free starts to prevent bit wandering and ensure pristine hole margins in hard stone.
• Gold Level Diamond Matrix: Premium diamond concentration formulated for maximum wear resistance and aggressive penetration in high-PSI rebar-reinforced concrete.
• Lightweight Thin-Wall Tube Construction: 1/8-inch wall thickness minimizes rotational resistance and reduces fatigue during handheld core motor operation.
• 2 hp to 5 hp Motor Power Match: Engineered matrix bond handles high-torque outputs from professional 2 hp to 5 hp core drilling drive units.
• Standard 5/8"-11 Threaded Connection: Industry-standard threaded female hub ensures positive power transfer and broad compatibility across handheld core drills.

What's Included

• (1) Husqvarna Elite-Drill B1420 5/8" Diamond Crown Core Bit (Model 596242702)

Technical Specifications

Pro-Tip: Maintain consistent water pressure when initiating holes to keep slurry fluid, allowing the continuous crown profile to establish a stable pilot track without binding in hard aggregate.