Klein Tools KT175HFINS 7-in-1 insulated ratcheting lineman wrench featuring 1000V rated orange grip handle and dual socket ends.
Feature diagram of Klein KT175HFINS wrench calling out 3/4, 13/16, 1, and 1-1/8 inch square sockets, 9/16 and 3/4 inch hex sizes, and dual hammer faces.
Dimension callouts for Klein KT175HFINS ratcheting wrench indicating an 11.36-inch length, 2.37-inch head width, and 1.80-inch socket height.
Pass-through socket graphic demonstrating how long utility pole bolts extend completely through the Klein KT175HFINS ratcheting wrench head.
Klein Tools KT175HFINS 1000V rated 7-in-1 insulated lineman wrench with integrated dual striking hammer faces and textured grip.
Klein Tools Manufacturing promotional video
Klein Tools KT175HFINS 7-in-1 insulated ratcheting lineman wrench featuring 1000V rated orange grip handle and dual socket ends.
Feature diagram of Klein KT175HFINS wrench calling out 3/4, 13/16, 1, and 1-1/8 inch square sockets, 9/16 and 3/4 inch hex sizes, and dual hammer faces.
Dimension callouts for Klein KT175HFINS ratcheting wrench indicating an 11.36-inch length, 2.37-inch head width, and 1.80-inch socket height.
Pass-through socket graphic demonstrating how long utility pole bolts extend completely through the Klein KT175HFINS ratcheting wrench head.
Klein Tools KT175HFINS 1000V rated 7-in-1 insulated lineman wrench with integrated dual striking hammer faces and textured grip.
Klein Tools Manufacturing promotional video
KLEIN TOOLS

Klein Lineman Wrench KT175HFINS 7 in 1 Insulated Dual Hammer Face (1000V Rated ASTM F1505 Square Hex Socket Utility Ratchet Hand Tool)

Only 3 left
SKU: KT175HFINS
$139.00 USD

Description

Klein promotional logo logout

Klein Tools KT175HFINS 7-in-1 Hammer Facing Insulated Lineman Wrench

The Klein Tools KT175HFINS 7-in-1 Insulated Lineman Wrench is a 1000V-rated ratcheting utility hand tool engineered with four square socket sizes, two hex sizes, and dual integrated striking faces. Certified to ASTM F1505 and IEC 60900 standards, this 30.4 oz forged steel wrench features a 32-tooth ratcheting mechanism with an 11.25-degree swing arc and a bolt-through design to install overhead line hardware and pole-mounted utility equipment efficiently in energized environments.

Best Used For:

  • Pole-Mounted Utility Hardware Installation: Driving and securing square pole bolts and lag screws using four integrated square socket sizes (3/4 in., 13/16 in., 1 in., 1-1/8 in.).
  • Energized Overhead Line Servicing: Fastening structural hardware safely on electrical distribution systems requiring 1000V ASTM F1505 insulated hand tools.
  • Utility Staple & Hardware Driving: Striking pole staples, ground wire clips, and hardware pins directly using dual-sided forged hammer faces without changing tools.

Key Performance & Safety Features

  • 1000V Certified 3-Layer Insulation: Complies with ASTM F1505 and IEC 60900 safety standards and features a white underlayer to signal insulation wear.
  • Dual Machined Hammer Faces: Balanced striking heads forged directly onto the wrench head allow driving staples and hardware from either side.
  • 32-Tooth Ratcheting Mechanism: Delivers a smooth 11.25-degree swing arc for tight rotational access on obstructed utility pole crossarms.
  • Open Bolt-Through Socket Geometry: Permits long threaded bolts and studs to pass completely through the wrench head during tightening.
  • Ergonomic High-Traction Handle: Textured insulation grip offers balanced control and full compatibility with high-voltage rubber lineman gloves.

What's Included

  • (1) Klein Tools KT175HFINS 7-in-1 Hammer Facing Insulated Lineman Wrench

Technical Specifications

Brand Klein Tools
Model Number KT175HFINS
Voltage Protection Rating 1000 V AC / Certified ASTM F1505 & IEC 60900
Square Socket Sizes 3/4 in., 13/16 in., 1 in., 1-1/8 in.
Hex Sizes 9/16 in., 3/4 in.
Tooth Count & Swing Arc 32 Teeth / 11.25° Swing Arc
Special Features Dual Striking Hammer Faces / Bolt-Through Design
Insulation Construction 3-Layer Injection Molded with White Wear Indicator
Material & Finish Forged Alloy Steel / Black Phosphate Finish
Overall Length 11.36 in. (28.9 cm)
Overall Height & Width 1.8 in. x 2.37 in.
Total Weight 30.4 oz. (1.9 lbs / 862 g)
Pro-Tip: Inspect the handle insulation before climbing; if the inner white warning layer becomes visible through the outer orange dielectric coating, take the tool out of service immediately.