The Klein KNECT 11-in-1 Ratcheting Screwdriver assembled with a 5/16 inch nut driver visible at the tip, showing the yellow and black Cushion-Grip handle.
Annotated image of the Klein KNECT 11-in-1 Ratcheting Screwdriver, highlighting the Cushion-Grip handle, the collar for setting ratchet direction, and the precision-machined, impact-rated bit tips.
Diagram showing the 11 included drive ends of the KNECT Multi-Bit Driver: 7 driver bits (Phillips, Slotted, Square, TORX) and 4 nut driver sizes (1/4, 5/16, 3/8, 1/2 inch).
Montage illustrating multiple KNECT system configurations, showing sockets and adapters used with a ratcheting wrench and a cordless impact driver.
Disassembled view of the Klein KNECT 11-in-1 Ratcheting Screwdriver, showing the handle and the various bits and nut drivers included in the set.
Close-up of a KNECT double-ended bit (5/16 inch and 3/8 inch nut drivers) showing the connection point and the impact-rated multi-bit assembly.
Side view of the Klein KNECT 11-in-1 Ratcheting Screwdriver fully assembled, highlighting the black handle and the yellow ratchet collar.
Close-up of two KNECT impact-rated power nut drivers, 3/8 inch (blue band) and 5/16 inch (yellow band), showing the hex shank for use with an impact driver.
Close-up of two KNECT impact-rated power nut drivers (3/8 inch and 5/16 inch) flanking a KNECT double-ended bit, showing the impact-ready hexagonal shanks.
The Klein KNECT 11-in-1 Ratcheting Screwdriver assembled with a 5/16 inch nut driver visible at the tip, showing the yellow and black Cushion-Grip handle.
Annotated image of the Klein KNECT 11-in-1 Ratcheting Screwdriver, highlighting the Cushion-Grip handle, the collar for setting ratchet direction, and the precision-machined, impact-rated bit tips.
Diagram showing the 11 included drive ends of the KNECT Multi-Bit Driver: 7 driver bits (Phillips, Slotted, Square, TORX) and 4 nut driver sizes (1/4, 5/16, 3/8, 1/2 inch).
Montage illustrating multiple KNECT system configurations, showing sockets and adapters used with a ratcheting wrench and a cordless impact driver.
Disassembled view of the Klein KNECT 11-in-1 Ratcheting Screwdriver, showing the handle and the various bits and nut drivers included in the set.
Close-up of a KNECT double-ended bit (5/16 inch and 3/8 inch nut drivers) showing the connection point and the impact-rated multi-bit assembly.
Side view of the Klein KNECT 11-in-1 Ratcheting Screwdriver fully assembled, highlighting the black handle and the yellow ratchet collar.
Close-up of two KNECT impact-rated power nut drivers, 3/8 inch (blue band) and 5/16 inch (yellow band), showing the hex shank for use with an impact driver.
Close-up of two KNECT impact-rated power nut drivers (3/8 inch and 5/16 inch) flanking a KNECT double-ended bit, showing the impact-ready hexagonal shanks.
KLEIN TOOLS

Klein Screwdriver Nut Driver 32500HDRT 11 in 1 KNECT (Impact Rated Ratcheting Cushion Grip Handle Phillips Slotted Square TORX Fastener Driving)

In stock
SKU: 32500HDRT
$29.97 USD

Description

Klein promotional logo logout

Klein KNECT 32500HDRT 11-in-1 Ratcheting Impact-Rated Screwdriver & Nut Driver

The Klein KNECT 32500HDRT 11-in-1 Ratcheting Impact-Rated Screwdriver & Nut Driver is a multi-bit manual and power fastening tool system engineered for driving hex nuts, Phillips, slotted, square, and TORX screws. Featuring a 3-way ratcheting mechanism with forward, fixed, and reverse settings, this 10.8-ounce hand tool includes a Cushion-Grip handle and precision-machined impact-rated bits with ball detent retention. Built with 1/4-inch quick-connect shanks on the power nut driver sleeves, this 11-function driver solves wrist fatigue, bit cam-out, and tool-swapping delays across electrical panel assembly and mechanical service work.

Best Used For:

  • Electrical Panel & Junction Box Fastening: Driving terminal screws, panel cover bolts, and ground lugs using precision Phillips, slotted, and square drive tips.
  • HVAC & Ductwork Hex Nut Driving: Fastening sheet metal screws and duct brackets using 1/4-inch, 5/16-inch, 3/8-inch, and 1/2-inch impact-rated nut driver ends.
  • Impact Driver Power Transition: Removing power nut driver sleeves from the manual handle to chuck directly into cordless impact drivers for high-torque applications.

Key Performance & Safety Features

  • Fully Impact-Rated Components: Every bit and nut driver sleeve is engineered to withstand high torque from 1/4-inch cordless impact drivers.
  • 3-Position Ratcheting Mechanism: Smooth ratchet collar provides forward, fixed, and reverse drive settings to reduce wrist strain during continuous turning.
  • 1/4-Inch Quick-Connect Power Shanks: Detachable nut driver shafts interface directly with impact drivers for rapid power driving.
  • Cushion-Grip Ergonomic Handle: High-friction handle overmolding maximizes manual turning torque while absorbing impact feedback.
  • Precision-Machined Anti-Cam-Out Tips: Exact-fit bit geometry delivers tight fastener engagement to prevent screw head stripping and slippage.
  • Secure Ball Detent Bit Retention: Internal steel ball detents hold bits firmly in place during heavy manual or power driving operations.

What's Included

  • (1) Klein KNECT Cushion-Grip Ratcheting Screwdriver Handle
  • (1) #1 Phillips / #2 Phillips Double-Ended Bit
  • (1) 3/16 in. Slotted / 1/4 in. Slotted Double-Ended Bit
  • (1) #1 Square / #2 Square Double-Ended Bit
  • (1) T25 TORX Single-Ended Bit
  • (1) 1/4 in. Power Nut Driver Barrel
  • (1) 5/16 in. Power Nut Driver Barrel
  • (1) 3/8 in. Power Nut Driver Barrel
  • (1) 1/2 in. Standard Nut Driver Sleeve

Technical Specifications

Manufacturer Brand Klein Tools
Model Number / Part ID 32500HDRT
Tool Functional Capacity 11 Drive Ends (7 Screwdriver Bits + 4 Nut Drivers)
Impact Rating Certification Impact-Rated Bits and Nut Driver Sleeves
Ratcheting Mechanism Modes Forward, Fixed, Reverse Collar Control
Included Nut Driver Sizes 1/4 in., 5/16 in., 3/8 in., 1/2 in.
Included Screwdriver Bit Sizes #1 & #2 Phillips; 3/16 in. & 1/4 in. Slotted; #1 & #2 Square; T25 TORX
Shank Length Dimension 3.6 in. (9.14 cm)
Overall Tool Length 8.0 in. (20.32 cm)
Tool Net Operating Weight 10.8 oz. (0.675 lbs / 306 g)
Bit Retention Architecture Internal Steel Ball Detent Mechanism
Handle Material Composition High-Impact Plastic with Cushion-Grip Overmold
Pro-Tip: Pop the 5/16-inch nut driver sleeve out of the manual ratcheting handle and snap its 1/4-inch quick-connect shank straight into your cordless impact driver to zip HVAC duct screws in half the time.