A studio shot of the 6-piece nut setter set arranged by size, showing the color-coded bands in red, yellow, blue, brown, red, and yellow on the 5-inch long steel shafts.
An informational diagram highlighting the 5-inch extended reach for recessed areas and the rare-earth magnets at the tips of the drivers.
A close-up view of the hex driver tips facing forward, displaying the industrial-strength rare-earth magnets recessed inside the color-coded barrels.
An action shot of a professional using the nut setter in an impact driver to fasten a hex-head screw into a deep, hard-to-reach metal electrical box.
A side-by-side comparison showing the 5-inch Klein nut setter reaching past an obstruction compared to a standard shorter driver that cannot reach the fastener.
A worker's hand holding the impact driver with the nut setter attached, demonstrating the magnetic holding power by keeping a large bolt secure upside down.
featuring the Klein Tools logo and listing the hex sizes included: 1/4, 5/16, 3/8, 7/16, 1/2, and 9/16 inch.
A worker using an impact driver with the orange-banded nut setter to drive a fastener into a wall, showcasing the extended reach.
A close-up view of the orange 9/16 inch nut setter being used to tighten a nut on a conduit clamp attached to a vertical pipe.
A close-up of a gloved hand using the nut setter to fasten a bolt inside a metal electrical junction box.
A studio shot of the single 9/16 inch nut setter, showing the black shaft, orange color band, and hex shank.
A studio shot of the single 5/16 inch nut setter, displaying the black shaft, yellow color band, and hex shank.
A studio shot of the single 3/8 inch nut setter, featuring the black shaft, blue color band, and hex shank.
A studio shot of the 6-piece nut setter set arranged by size, showing the color-coded bands in red, yellow, blue, brown, red, and yellow on the 5-inch long steel shafts.
An informational diagram highlighting the 5-inch extended reach for recessed areas and the rare-earth magnets at the tips of the drivers.
A close-up view of the hex driver tips facing forward, displaying the industrial-strength rare-earth magnets recessed inside the color-coded barrels.
An action shot of a professional using the nut setter in an impact driver to fasten a hex-head screw into a deep, hard-to-reach metal electrical box.
A side-by-side comparison showing the 5-inch Klein nut setter reaching past an obstruction compared to a standard shorter driver that cannot reach the fastener.
A worker's hand holding the impact driver with the nut setter attached, demonstrating the magnetic holding power by keeping a large bolt secure upside down.
featuring the Klein Tools logo and listing the hex sizes included: 1/4, 5/16, 3/8, 7/16, 1/2, and 9/16 inch.
A worker using an impact driver with the orange-banded nut setter to drive a fastener into a wall, showcasing the extended reach.
A close-up view of the orange 9/16 inch nut setter being used to tighten a nut on a conduit clamp attached to a vertical pipe.
A close-up of a gloved hand using the nut setter to fasten a bolt inside a metal electrical junction box.
A studio shot of the single 9/16 inch nut setter, showing the black shaft, orange color band, and hex shank.
A studio shot of the single 5/16 inch nut setter, displaying the black shaft, yellow color band, and hex shank.
A studio shot of the single 3/8 inch nut setter, featuring the black shaft, blue color band, and hex shank.
KLEIN TOOLS

Klein Tools Nut Setter Set 32930 6 Piece Magnetic Power Drivers 5 Inch Extended Impact Rated SAE Hex Driver Shafts Rare Earth Fastening Kit

Only 3 left
SKU: 32930
$29.98 USD

Description

Klein promotional logo logout

Contractor-Grade 5-Inch Color-Coded Impact-Rated Magnetic Hex Driver Shaft Module Group with High-Torque Alloy Steel Shell and Rare-Earth Core

The Klein Tools 32930 6-Piece Magnetic Power Nut Setter Set 5-Inch Long Impact Rated SAE Hex Drivers with Rare-Earth Magnets delivers specialized industrial fastening utility and exceptional torque transmission efficiency across dense electrical box networks and HVAC system chassis configurations. Engineered from forged high-grade impact steel alloys with a standard 1/4-inch hex shank connection frame, this high-performance layout tool ensemble withstands extreme torque spikes without shearing or stripping driver socket vertices. This professional contractor solution resolves dropping loose hex screws down dark utility conduits, restricted access placement bottlenecks behind machinery obstructions, and manual size scanning delays by combining scaled rare-earth magnetic cores with extended 5-inch reach geometry and visible color-coded band rings. Outfitted with complete SAE coverage stretching from 1/4-inch to 9/16-inch sizes, a non-insulated solid core profile, and a protective anti-corrosive outer layer, this robust hardware system optimizes subcontractor assembly metrics during heavy terminal mounting runs, metal framing fastening loops, and industrial sheet metal installations.

Best Used For:

  • Recessed HVAC Fastening: Driving self-tapping screws and hex fasteners cleanly behind condenser coils and deep inside mechanical furnace duct cavities single-handedly.
  • Deep Panel Box Anchoring: Reaching past internal wiring harnesses and breakers to anchor heavy backplate screws into industrial low-voltage enclosure frames.
  • High-Torque Sheet Metal Staging: Fastening industrial metal framing grids and heavy duct connections where high-speed impact driver rotation cycles strip lesser tool metals.

Key Performance & Safety Features

  • High-Grade Impact Rating: Forged steel alloy structure absorbs standard power impact torque loads, protecting driver tips from splitting under stress.
  • Rare-Earth Magnetic Core: Advanced permanent internal magnets hold heavy hex head screws firmly in place to facilitate accurate one-handed overhead work on ladders.
  • Extended 5-Inch Clearance: Extra-long hollow shank path extends physical tool layout reach to bypass deep structural frame obstacles and recessed engine panels.
  • Color-Coded Visual Matrix: Highly visible colored band markers designate specific dimensional driver sizes instantly to accelerate workflow tracking inside deep bags.
  • Optimized Holding Power: Magnet volume scales incrementally with each hex cup size, ensuring proper retention metrics are matched to larger, heavier hardware parameters.

What's Included

  • (1) 1/4-Inch Hex Magnetic Power Nut Setter Driver (Red Identification Band)
  • (1) 5/16-Inch Hex Magnetic Power Nut Setter Driver (Yellow Identification Band)
  • (1) 3/8-Inch Hex Magnetic Power Nut Setter Driver (Blue Identification Band)
  • (1) 7/16-Inch Hex Magnetic Power Nut Setter Driver (Brown Identification Band)
  • (1) 1/2-Inch Hex Magnetic Power Nut Setter Driver (Red Identification Band)
  • (1) 9/16-Inch Hex Magnetic Power Nut Setter Driver (Yellow Identification Band)

Technical Specifications

Specification Value
Brand Name Klein Tools
Model Number 32930
Product Classification Type Magnetic Power Nut Setter Set
Connection Shank Style 1/4 in. Hex Universal Drive Shank
Individual Shaft Reach 5 in.
Overall Tool Length Dimension 6.3 in.
Total Kit Piece Count 6 Modules
Primary Base Metal Construction Forged High-Torque Carbon Steel Alloy
Measurement Increment Standard SAE Fractional System
Magnetic Core Technology Yes (High-Density Permanent Rare-Earth)
Electrical Insulation Protection No (Not Intended for Active Live Circuit Utilities)
Environmental Shielding Coating Corrosion-Resistant Industrial Shield Paint
Net Hardware Assembly Weight 1.57 lbs.

Pro-Tip: Periodically wipe out the inner magnetic socket recesses with a small clean swab to discard fine floating iron filing build-up. Clearing micro shard matrices regularly guarantees your hex heads sit completely flat within the socket throat, preventing driver slippage and tracking errors under high torque speeds.