Full Klein Tools 28-piece hand tool kit displayed in front of branded backpack, including pliers, screwdrivers, testers, tape measure, level, and safety glasses.
Klein Tools nut driver with cushion-grip handle, hollow shaft for long bolts, and rare earth magnetic tip for secure fastener retention.
Klein Tools slotted screwdriver with cushion-grip handle, chrome-plated shank, and precision-machined tip for exact fit and corrosion resistance
Yellow and black Klein Tools wire stripper labeled for 10–18 AWG solid wire, with spring-loaded action and shear-type blades for clean cuts.
Klein Tools crimping and cutting tool with forged steel construction, tapered nose, and labeling for crimping 10–22 AWG terminals.
Promotional image of Klein Tools safety glasses models 60159 and 60160, featuring clear and tinted lenses with impact protection and anti-fog coating.
Three types of pliers displayed diagonally: diagonal cutting pliers, combination pliers, and needle-nose pliers, each with distinct colored handles.
Open Klein Tools backpack with orange interior showing multiple compartments, elastic loops, and vertical pockets for organized tool storage.
Person wearing safety gear holding Klein Tools canvas zipper pouch labeled "5139," placing it into a branded tool backpack in a jobsite setting.
Tradesman Pro Backpack promotional video
Full Klein Tools 28-piece hand tool kit displayed in front of branded backpack, including pliers, screwdrivers, testers, tape measure, level, and safety glasses.
Klein Tools nut driver with cushion-grip handle, hollow shaft for long bolts, and rare earth magnetic tip for secure fastener retention.
Klein Tools slotted screwdriver with cushion-grip handle, chrome-plated shank, and precision-machined tip for exact fit and corrosion resistance
Yellow and black Klein Tools wire stripper labeled for 10–18 AWG solid wire, with spring-loaded action and shear-type blades for clean cuts.
Klein Tools crimping and cutting tool with forged steel construction, tapered nose, and labeling for crimping 10–22 AWG terminals.
Promotional image of Klein Tools safety glasses models 60159 and 60160, featuring clear and tinted lenses with impact protection and anti-fog coating.
Three types of pliers displayed diagonally: diagonal cutting pliers, combination pliers, and needle-nose pliers, each with distinct colored handles.
Open Klein Tools backpack with orange interior showing multiple compartments, elastic loops, and vertical pockets for organized tool storage.
Person wearing safety gear holding Klein Tools canvas zipper pouch labeled "5139," placing it into a branded tool backpack in a jobsite setting.
Tradesman Pro Backpack promotional video
KLEIN TOOLS

Klein Tools Electrician Tool Set 80028 28 Piece Hand Kit (CAT IV 1000V NCVT GFCI Tester Pliers Screwdrivers Backpack Conduit Wiring Storage)

Only 3 left
SKU: 80028
$429.99 USD

Description

Klein promotional logo logout

Klein Tools 80028 28-Piece Electrician Hand Tool Kit with Tradesman Pro Backpack

The Klein Tools 80028 28-Piece Electrical Hand Tool Kit equips professional electricians, commercial apprentices, and maintenance technicians with high-leverage pliers, magnetic screwdrivers, hollow-shaft nut drivers, and diagnostic test instruments. Featuring a CAT IV 1000V dual-range non-contact voltage tester with flashlight and an integrated GFCI receptacle circuit analyzer, this comprehensive setup ensures rapid fault detection and safe panel installations. Stored in a rugged 39-pocket Tradesman Pro™ backpack with a molded impact-resistant base and safety glasses compartment, this heavy-duty 17.25-pound tool set streamlines conduit fitting, wire termination, and distribution panel wiring on active commercial jobsites.

Best Used For:

  • Commercial Electrical Rough-In & Wiring: Stripping 10-18 AWG solid wire, pulling fish tape, and deburring conduit lines with dedicated reaming drivers.
  • Live Circuit & Voltage Verification: Detecting 12V to 1000V AC potentials and diagnosing open neutral or reversed polarity faults on GFCI branch circuits.
  • Distribution Panel & Enclosure Assembly: Torquing terminal lugs, breaker screws, and ground bar nuts using magnetic-tip drivers and hollow nut setters.

Key Performance & Safety Features

  • Dual-Range Non-Contact Voltage Tester (NCVT-3P): Delivers non-contact detection from 12V to 1000V AC with a CAT IV 1000V safety rating and bright LED flashlight.
  • Comprehensive 28-Piece Outfitting: Supplies high-leverage diagonal-cutting pliers, heavy-duty pump pliers, precision wire strippers, and 7 magnetic hollow-shaft nut drivers.
  • Tradesman Pro™ 39-Pocket Backpack: 1680D ballistic weave organizer backpack features a hard-molded bottom to protect hand tools from water and debris.
  • Ergonomic Cushion-Grip Handles: Custom-formulated grip material provides maximum turning torque and all-day comfort while reducing hand slippage.
  • GFCI Receptacle Circuit Analyzer: Automatically identifies standard wiring configurations, open grounds, open hots, and trips GFCI safety devices on demand.

What's Included

  • (4) Pliers: High-Leverage Diagonal-Cutters, Heavy-Duty Long-Nose Side-Cutters, Fish Tape Pulling Pliers, Classic Pump Pliers
  • (6) Screwdrivers: 1/4" Cabinet, 3/16" Cabinet, #2 Phillips, 5/16" Keystone, #2 Square Recess, Conduit-Fitting Reamer
  • (7) Hollow-Shaft Magnetic Nut Drivers: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"
  • (1) Wire Stripper / Cutter (10–18 AWG Solid, 12–20 AWG Stranded)
  • (1) Crimping and Cutting Tool (10–22 AWG Non-Insulated and Insulated Terminals)
  • (1) Folding Utility Knife with Heavy-Duty Aluminum Handle
  • (1) Pro Folding Hex Key Set (9-Key SAE)
  • (1) Dual-Range Non-Contact Voltage Tester with Flashlight (NCVT-3P)
  • (1) GFCI Receptacle Tester (RT210)
  • (1) 25-Foot Tape Measure with Magnetic Single Hook
  • (1) 9-Inch Rare-Earth Magnetic Aluminum Torpedo Level
  • (1) Clear Low-Profile Anti-Fog Safety Glasses
  • (1) Heavy-Duty No. 10 Canvas Zipper Tool Bag
  • (1) Tradesman Pro™ Backpack Tool Bag with 39 Pockets

Technical Specifications

Specification Detail
Model Number / Part ID 80028 (Master Electrician Set)
Total Piece Count 28 Pieces (Tools, Testers, Bags)
Voltage Tester Safety Rating CAT IV 1000V / CAT III 1000V (NCVT-3P)
Voltage Detection Range 12V to 1000V AC / 70V to 1000V AC
Wire Stripping Gauge Capacity 10 - 18 AWG Solid / 12 - 20 AWG Stranded
Wire Terminal Crimping Capacity 10 - 22 AWG Insulated and Non-Insulated
Nut Driver Shaft Geometry Hollow Shaft for Long Bolt Clearance (3/16" to 1/2")
Tool Storage Backpack Pockets 39 Pockets with Molded Glasses Compartment
Total Kit Carrying Weight 17.25 lbs (7.82 kg)
UPC Barcode Identifier 092644800283
Pro-Tip: Use the conduit-fitting reaming screwdriver to deburr 1/2-inch, 3/4-inch, and 1-inch EMT conduit inside and outside simultaneously while tightening junction box locknuts; deburring immediately protects copper wire insulation from sharp metal edges during wire pulls.