Klein 32286 insulated 2-in-1 screwdriver showing the bright orange dielectric coating that provides 1000V shock protection near live components.
Diagram detailing the 1000V ASTM F1505 rating, twist-lock collar release, Cushion-Grip handle, and slim-tip #1 Phillips and 3/16-inch slotted blades.
Klein 32286 insulated screwdriver showcasing the clear handle collar and Cushion-Grip handle designed for high-torque electrical work.
Klein 32286 Cushion-Grip handle separated from the double-ended slim-tip insulated shaft to highlight the quick-release lock collar.
End-view of the Klein 32286 insulated handle showing the hex receptacle that securely locks double-ended flip blades in place.
Double-ended 1000V insulated flip-blade featuring a #1 Phillips tip on one end and a 3/16-inch slotted tip on the opposite end.
Side-by-side comparison showing how a slim-tip insulated blade fits deep inside terminal block recesses without catching on outer insulation.
Electrician wearing leather gloves inserting the reversible 1000V flip blade into the Klein Cushion-Grip handle lock collar.
Electrician using the 3/16-inch slotted tip on the Klein 32286 insulated driver to adjust circuit breaker screws inside an electrical panel.
Electrician guiding the 1000V insulated #1 Phillips driver tip to safely tighten panel board wiring terminals near live conductors.
Klein 32286 insulated 2-in-1 screwdriver resting on an electrical panel cabinet, showcasing its 1000V ASTM F1505 rated orange slim-tip shaft.
Interchangeable Insulated Screwdriver Set promotional video
Klein 32286 insulated 2-in-1 screwdriver showing the bright orange dielectric coating that provides 1000V shock protection near live components.
Diagram detailing the 1000V ASTM F1505 rating, twist-lock collar release, Cushion-Grip handle, and slim-tip #1 Phillips and 3/16-inch slotted blades.
Klein 32286 insulated screwdriver showcasing the clear handle collar and Cushion-Grip handle designed for high-torque electrical work.
Klein 32286 Cushion-Grip handle separated from the double-ended slim-tip insulated shaft to highlight the quick-release lock collar.
End-view of the Klein 32286 insulated handle showing the hex receptacle that securely locks double-ended flip blades in place.
Double-ended 1000V insulated flip-blade featuring a #1 Phillips tip on one end and a 3/16-inch slotted tip on the opposite end.
Side-by-side comparison showing how a slim-tip insulated blade fits deep inside terminal block recesses without catching on outer insulation.
Electrician wearing leather gloves inserting the reversible 1000V flip blade into the Klein Cushion-Grip handle lock collar.
Electrician using the 3/16-inch slotted tip on the Klein 32286 insulated driver to adjust circuit breaker screws inside an electrical panel.
Electrician guiding the 1000V insulated #1 Phillips driver tip to safely tighten panel board wiring terminals near live conductors.
Klein 32286 insulated 2-in-1 screwdriver resting on an electrical panel cabinet, showcasing its 1000V ASTM F1505 rated orange slim-tip shaft.
Interchangeable Insulated Screwdriver Set promotional video
KLEIN TOOLS

Klein Tools Insulated Screwdriver 32286 Flip Blade 2 in 1 Interchangeable Driver (1000V Rated ASTM F1505 #1 Phillips 3/16 Slotted)

In stock
SKU: 32286
$19.99 USD

Description

Klein promotional logo logout

Klein Tools 32286 1000V Insulated 2-in-1 Flip-Blade Screwdriver

The Klein Tools 32286 is a 1000-volt insulated double-ended screwdriver incorporating a #1 Phillips and a 3/16-inch Slotted slim-tip drive shaft into a single interchangeable hand tool. Tested to satisfy ASTM F1505 insulation safety standards, this 4.1 oz (116 g) multi-bit electrician's driver features a flame- and impact-resistant dielectric orange coating over induction-hardened steel to shield operators against live electrical arc flashes. Equipped with a twist-release collar auto-eject mechanism and a high-torque Cushion-Grip™ handle, this 8.2-inch hand tool allows electrical contractors and maintenance technicians to adjust recessed terminal block screws and circuit breaker lugs near live sources safely.

Best Used For:

  • Live Panel & Circuit Breaker Maintenance: Fastening terminal block clamps and breaker screws on energized panels up to 1000 Volts.
  • Commercial Control Cabinet Wiring: Inserting the narrow slim-tip blade profile into deep, narrow relay terminals without snagging surrounding insulation.
  • On-the-Go Electrical Service Calls: Reducing tool pouch weight by instantly swapping between #1 Phillips and 3/16-inch Slotted drives using the auto-eject collar.

Key Performance & Safety Features

  • 1000-Volt Safety Certification: Flame- and impact-resistant orange insulation layer meets or exceeds ASTM F1505 standards for working near live electrical sources.
  • Twist-Lock Auto-Eject Collar: Allows rapid blade reversing or swapping with a quick manual turn of the collar lock mechanism.
  • Slim-Tip Interchangeable Geometry: Narrowed blade insulation profile fits directly into deep, narrow terminal blocks without stripping plastic shrouds.
  • Induction-Hardened Steel Core: Precision-machined dual-ended steel shaft offers 3.5 inches of extended handle reach for maximum torsional strength.
  • Ergonomic Cushion-Grip™ Handle: High-dielectric plastic core with rubber overmold delivers optimal turning torque, oil resistance, and reduced hand fatigue.

What's Included

  • (1) Klein Tools 1000V Insulated Cushion-Grip™ Screwdriver Handle with Lock Collar
  • (1) Double-Ended Slim-Tip Insulated Flip-Blade (#1 Phillips x 3/16" Slotted)

Technical Specifications

Brand Manufacturer Klein Tools®
Model Part Number OEM SKU 32286
Tool Classification System 1000V Insulated 2-in-1 Flip-Blade Screwdriver
Voltage Insulation Safety Rating 1000 Volts AC / 1500 Volts DC Certified
Manufacturing & Safety Standards Meets or Exceeds ASTM F1505 Specifications
Included Drive Sizes #1 Phillips and 3/16 inch (4.8 mm) Slotted
Shank Material & Construction Induction-Hardened Alloy Steel with Impact-Resistant Coating
Usable Exposed Shank Length 3.5 inches (8.9 cm)
Handle Type & Material Cushion-Grip™ High-Dielectric Plastic and Rubber Overmold
Handle Length Dimension 4.7 inches (11.9 cm)
Overall Assembled Unit Length 8.2 inches (20.8 cm)
Magnetic Tip Capability No
Total Piece Count 2 Pieces (1 Handle + 1 Reversible Blade)
Assembled Net Tool Weight 4.1 oz (116 g)
Global Trade Item Number GTIN 00092644322860

Pro-Tip: Inspect the orange dielectric coating along the shaft before every use near live circuits. If deep knicks or cuts expose the white underlayer or bare metal core, replace the blade immediately to preserve your 1000V insulation protection.