Koshin Submersible Trash Pump PKS-65011 2 Inch NPT Dewatering Utility Machine (0.5 HP 110V 4760 GPH 33ft Head 5/8 Solids Wastewater Pond Drainage)
Couldn't load pickup availability
Koshin PKS-65011 1/2 HP 110V 2" Electric Submersible Trash Dewatering Pump
The Koshin PKS-65011 1/2 HP electric submersible trash pump drains flooded commercial basements, evacuates construction excavation trenches, clears retention ponds, and pumps wastewater containing spherical solids up to 5/8 inches in diameter at high-volume delivery rates up to 4,760 GPH (80 GPM) with a 33-foot maximum discharge head. Powered by an energy-efficient 110V 7-amp motor with built-in thermal overload protection and dual oil-bathed silicon carbide mechanical seals, this compact dewatering unit operates reliably in water as shallow as 5.5 inches while supporting temporary dry-run conditions. Featuring a compact 10-inch diameter footprint that fits easily inside narrow sumps, paired with non-toxic DTE 24 paraffin seal oil and a completely rebuildable modular architecture, it equips utility crews, site contractors, and municipal maintenance specialists with heavy-duty dirty-water drainage backed by a 3-year limited manufacturer warranty.
Best Used For:
- Excavation Trench and Jobsite Pit Dewatering: Clearing muddy groundwater, rainwater pools, and gritty runoff from foundation footings and utility trenches at rates up to 4,760 gallons per hour.
- Wastewater and Pond Drainage with Solids: Transferring sludge, leaves, sand, pebbles, and wastewater containing suspended debris up to 5/8 inches in diameter without impeller clogs.
- Basement, Sump, and Pool Evacuation: Pumping standing floodwater out of residential basements, parking garages, and swimming pools down to a 5.5-inch operating depth.
Key Performance & Safety Features
- High-Capacity 5/8-Inch Solids Handling: Semi-vortex trash passage allows leaves, mud, small stones, and sewage solids to pass freely through the volute without jamming.
- Double Silicon Carbide Mechanical Seals: Dual shaft seals encased in an isolated lubrication chamber protect motor internals and provide dry-run resilience against abrasive grit.
- Thermal Motor Overload Protection: Automatic thermal shut-off sensor prevents stator burnout caused by low-voltage drops, accidental dry-running, or locked rotor conditions.
- Shallow 5.5-Inch Water Level Operation: Efficient intake geometry allows the pump to prime and operate continuously in standing water depths down to 5.5 inches.
- Environmentally Safe DTE 24 Paraffin Oil: Food-grade non-toxic light paraffin lubricant ensures environmental safety in retention ponds, agricultural basins, and aquatic applications.
- Completely Field-Rebuildable Design: Modular pump casing and replacement wear components allow easy maintenance and extended equipment service life.
What's Included
- (1) Koshin PKS-65011 1/2 HP Electric Submersible Trash Pump
- (1) 20-Foot Watertight Molded Power Cord
- (1) 2-Inch NPT Threaded Discharge Connection
- (1) Built-In Ergonomic Carrying Handle
- (1) Owner's Operation and Maintenance Manual
Technical Specifications
| Manufacturer | Koshin Ltd. |
| Model Number | PKS-65011 |
| Product Classification | Electric Submersible Trash Dewatering Pump |
| Motor Power Rating | 0.50 HP (1/2 HP / 370 W) |
| Electrical Input Voltage | 110V AC (Single-Phase, 60 Hz) |
| Rated Operating Current | 7.0 Amperes |
| Discharge Port Connection | 2.000 inches (2 in / 50.8 mm) NPT Female Thread |
| Maximum Flow Rate Capacity | 4,760 GPH (80 GPM / 300 LPM) |
| Maximum Total Discharge Head | 33.00 feet (10.06 m) |
| Maximum Spherical Solids Passage | 0.625 inches (5/8 in / 15.88 mm) |
| Minimum Operating Water Depth | 5.50 inches (139.7 mm) |
| Shaft Seal Architecture | Dual Oil-Bathed Silicon Carbide Mechanical Seals |
| Internal Lubricant Type | Non-Toxic DTE 24 Light Paraffin Oil |
| Power Cable Length | 20.00 feet (6.10 m) Submersible Grade |
| Overall Package Dimensions | 10.00" L x 10.00" W x 17.00" H |
| Total Shipping Weight | 36.00 lbs (16.33 kg) |
| Manufacturer Warranty | 3-Year Limited Manufacturer Warranty |
Pro-Tip: When pumping muddy excavation pits containing coarse aggregate or gravel, place the pump inside a perforated 5-gallon bucket or atop a concrete masonry block; this maintains unobstructed flow through the 5/8-inch solids passage while preventing large bedrock fragments from blocking the bottom strainer.