Kraft Tool Concrete Finishing Trowel CF211PF 12 by 3 Inch Square End Carbon Steel (ProForm Soft Grip Handle Flat Cement Masonry Tool)

Kraft Tool CF211PF 12-Inch x 3-Inch Square End Carbon Steel Finishing Trowel with ProForm Handle

The Kraft Tool CF211PF 12-Inch x 3-Inch Finishing Trowel is an industrial concrete masonry tool constructed with a 0.026-inch thick cross-ground carbon steel blade to deliver a smooth, burnished finish on poured concrete slabs. Built with a square end geometry, a cast aluminum mounting, and stainless steel compression rivets, this flat finishing trowel utilizes Kraft's patented ProForm® soft grip handle to eliminate hand fatigue and permit full edge-to-edge coverage along form corners, sidewalks, and interior concrete floors.

Best Used For:

• Concrete Slab & Flatwork Finishing: Smoothing and troweling poured cement patios, walkways, and interior slab surfaces during final set phase.
• Tight Corner & Form Edge Troweling: Reaching squarely into 90-degree form corners and tight wall margins where rounded trowels leave unworked concrete.
• Patching & Repair Work: Applying precise pressure to smooth over surface spalls, patch compounds, and structural cement repairs.

Key Performance & Safety Features

• Cross-Ground Carbon Steel Blade: High-tensile 0.026-inch carbon steel blade provides optimal flex and stiffness for immediate out-of-the-box performance.
• Square End Blade Design: Straight 90-degree corners allow full-coverage finishing straight into form walls and tight perimeter edges.
• ProForm® Ergonomic Soft Grip: Patented textured rubber grip reduces hand strain, absorbs vibration, and prevents slipping when wet.
• Cast Aluminum Mounting: Lightweight, heavy-duty aluminum spine provides structural support across the blade length without added weight.
• Stainless Steel Compression Rivets: Oversized toe rivets secure the blade to the mounting to prevent separation under heavy finishing pressure.
• Guaranteed No-Turn Handle Lock: Engineered locking mechanism prevents the handle assembly from spinning or loosening during continuous use.

What's Included

• (1) Kraft Tool CF211PF 12" x 3" Carbon Steel Square End Finish Trowel with ProForm Handle

Technical Specifications

Pro-Tip: Clean and dry the carbon steel blade completely after each concrete pour, then apply a light film of oil before storage to protect the steel surface from corrosion.