Kraft Tool Bronze Concrete Edger CF318 6 by 3 Inch 3 by 8 Inch Radius 3 by 4 Inch Lip Wood Handle (One Piece Cast Cement Masonry Tool)

Kraft Tool CF318 6-Inch x 3-Inch Bronze Hand Edger with 3/8-Inch Radius and Wood Handle

The Kraft Tool CF318 6-Inch x 3-Inch Bronze Hand Edger is a single-piece cast masonry tool manufactured from 100% heavy bronze alloy to form clean rounded borders on poured concrete slabs and pervious cement. Featuring a 3/8-inch radius blade edge with a 3/4-inch deep lip, this concrete finishing tool incorporates turned-up end profiles and a contoured hardwood handle to consolidate surface aggregates and prevent slab spalling along forms without gouging wet concrete.

Best Used For:

• Concrete Sidewalk & Slab Edging: Compacting coarse aggregates along wooden or steel concrete forms to establish chip-resistant 3/8-inch rounded edges.
• Pervious Concrete & High-Density Flatwork: Drawing cement paste to the surface on dense, abrasive concrete mixes to seal exposed perimeter edges.
• Commercial Walkway Joint Finishing: Gliding over wet concrete surfaces without gouging or dragging aggregate during repeated back-and-forth finishing passes.

Key Performance & Safety Features

• 100% Solid Cast Bronze Body: Heavy one-piece bronze casting provides maximum abrasion resistance against harsh concrete aggregates without rivets or welds.
• Precision 3/8-Inch Radius Edge: Creates a smooth rounded slab perimeter that resists chipping, spalling, and cracking under heavy foot traffic.
• 3/4-Inch Deep Forms Lip: Extended lip depth consolidates cement paste down the sides of slab forms for uniform edge density.
• Anti-Gouge Turned-Up Ends: Beveled end geometry glides smoothly over wet concrete slurries without digging into or scarring the slab.
• Smooth Hardwood Contour Grip: Solid wood handle attached to the cast mounting offers balanced leverage and comfortable control during long pours.
• Hand-Polished Finish Surface: Factory hand-polished bronze face minimizes material drag and prevents wet cement buildup during application.

What's Included

• (1) Kraft Tool CF318 6" x 3" Bronze Concrete Hand Edger with Wood Handle

Technical Specifications

Pro-Tip: Run the bronze edger along concrete form boards right after bull floating to consolidate aggregate and separate the slab edge from the form prior to final hand troweling.