Makita GA4553R 4-1/2-inch corded angle grinder with an 11.0A motor, side handle, and permanently attached wheel guard.
Cutaway view revealing the 11.0A copper-wound motor and armature assembly inside the Makita GA4553R angle grinder.
Gloved hand pressing the large no-lock-on paddle switch on the narrow barrel grip of the Makita GA4553R angle grinder.
Side profile of the 6.0-pound Makita GA4553R 4-1/2-inch angle grinder showing its compact gear housing and side handle.
Rear view of the Makita GA4553R angle grinder highlighting its narrow barrel grip, rear air vents, and cord guard.
Gloved thumb depressing the large spindle lock button on the cast aluminum gear head of the Makita GA4553R angle grinder.
Close-up of the two-stage safety lock-off lever on the paddle switch that prevents accidental motor startup.
Steel carabiner safety lanyard attached to the integrated tethering loop on the base of the Makita GA4553R angle grinder.
Close-up of the tool-less guard adjustment mechanism permanently mounted to the gear housing of the Makita GA4553R grinder.
Gloved operator adjusting the rotation angle of the permanently attached non-removable wheel guard on the Makita GA4553R.
Top-down view of the Makita GA4553R 4-1/2-inch angle grinder showing its narrow barrel grip, side handle, and non-removable guard.
Comfort graphic highlighting the large no-lock-on paddle switch design on the Makita GA4553R grinder for multi-position press control.
Convenience callout demonstrating a carabiner lanyard clipped to the integrated tethering loop on the Makita GA4553R grinder.
Innovation graphic detailing the permanently attached non-removable wheel guard on the Makita GA4553R angle grinder.
Power diagram showing the 11.0A motor cutaway delivering 11,000 RPM for heavy-duty metal grinding applications.
Fabricator grinding a steel angle iron workpiece using the Makita GA4553R angle grinder with safety lanyard connected.
Welder preparing a thick metal joint edge using the Makita GA4553R 4-1/2-inch corded paddle switch angle grinder.
Contractor grinding a steel box tube in an outdoor fabrication yard with the Makita GA4553R corded angle grinder.
Tradesman smoothing aluminum frame welds using a 4-1/2-inch grinding wheel mounted on the Makita GA4553R angle grinder.
Metal worker beveling a heavy steel pipe seam with the 11.0A Makita GA4553R angle grinder while throwing bright sparks.
Makita Angle Grinders with Non Removable Guard promotional video
Makita GA4553R 4-1/2-inch corded angle grinder with an 11.0A motor, side handle, and permanently attached wheel guard.
Cutaway view revealing the 11.0A copper-wound motor and armature assembly inside the Makita GA4553R angle grinder.
Gloved hand pressing the large no-lock-on paddle switch on the narrow barrel grip of the Makita GA4553R angle grinder.
Side profile of the 6.0-pound Makita GA4553R 4-1/2-inch angle grinder showing its compact gear housing and side handle.
Rear view of the Makita GA4553R angle grinder highlighting its narrow barrel grip, rear air vents, and cord guard.
Gloved thumb depressing the large spindle lock button on the cast aluminum gear head of the Makita GA4553R angle grinder.
Close-up of the two-stage safety lock-off lever on the paddle switch that prevents accidental motor startup.
Steel carabiner safety lanyard attached to the integrated tethering loop on the base of the Makita GA4553R angle grinder.
Close-up of the tool-less guard adjustment mechanism permanently mounted to the gear housing of the Makita GA4553R grinder.
Gloved operator adjusting the rotation angle of the permanently attached non-removable wheel guard on the Makita GA4553R.
Top-down view of the Makita GA4553R 4-1/2-inch angle grinder showing its narrow barrel grip, side handle, and non-removable guard.
Comfort graphic highlighting the large no-lock-on paddle switch design on the Makita GA4553R grinder for multi-position press control.
Convenience callout demonstrating a carabiner lanyard clipped to the integrated tethering loop on the Makita GA4553R grinder.
Innovation graphic detailing the permanently attached non-removable wheel guard on the Makita GA4553R angle grinder.
Power diagram showing the 11.0A motor cutaway delivering 11,000 RPM for heavy-duty metal grinding applications.
Fabricator grinding a steel angle iron workpiece using the Makita GA4553R angle grinder with safety lanyard connected.
Welder preparing a thick metal joint edge using the Makita GA4553R 4-1/2-inch corded paddle switch angle grinder.
Contractor grinding a steel box tube in an outdoor fabrication yard with the Makita GA4553R corded angle grinder.
Tradesman smoothing aluminum frame welds using a 4-1/2-inch grinding wheel mounted on the Makita GA4553R angle grinder.
Metal worker beveling a heavy steel pipe seam with the 11.0A Makita GA4553R angle grinder while throwing bright sparks.
Makita Angle Grinders with Non Removable Guard promotional video
Makita

Makita Angle Grinder GA4553R 4-1/2 Inch 11 Amp Paddle Switch (11000 RPM Non Removable Tool-Less Guard Soft Start Corded Metal Cutting)

In stock
SKU: GA4553R
$184.00 USD

Description

Makita Logo Logout

Makita GA4553R 4-1/2-Inch 11 Amp Corded Paddle Switch Angle Grinder with Non-Removable Guard

The Makita GA4553R 4-1/2-Inch Paddle Switch Angle Grinder is an industrial electric surface preparation tool engineered for high-volume weld grinding, structural metal beveling, and concrete scoring. Driven by a 11.0-amp motor operating at 11,000 RPM, this 6.0-pound corded grinder features a permanently attached non-removable tool-less wheel guard to comply with jobsite safety requirements. Outfitted with a two-stage no-lock-on paddle switch, an integrated lanyard tethering loop for high-altitude work safety, soft-start electronics, and anti-restart protection, this narrow barrel-grip machine utilizes labyrinth gear housing seals to isolate internal bearings from abrasive grinding dust.

Best Used For:

  • Structural Weld Grinding & Metal Beveling: Removing heavy weld seams and prepping steel plate edges using 4-1/2 inch grinding wheels at 11,000 RPM.
  • High-Altitude & Scaffolding Metal Fabrication: Operating safely on elevated scaffolding and aerial lifts using the built-in structural tether loop for lanyard tie-offs.
  • Masonry Tuckpointing & Concrete Scoring: Scoring concrete control joints and cleaning mortar joints with diamond blades while labyrinth seals protect drive bearings.

Key Performance & Safety Features

  • Permanently Attached Non-Removable Guard: Meets strict safety compliance codes by keeping the tool-less 4-1/2 inch wheel guard permanently fixed to the gear housing.
  • 11.0 Amp Industrial Motor Output: High-output motor maintains 11,000 RPM under heavy downward pressure to prevent wheel bogging during continuous cuts.
  • Integrated Lanyard Tether Loop: Built-in steel tether attachment point connects directly to safety lanyards to prevent accidental tool drops from elevated height.
  • Multi-Grip No-Lock-On Paddle Switch: Large paddle switch features a two-stage lock-off mechanism that permits comfortable engagement across multiple hand grips.
  • Anti-Restart & Soft-Start Protection: Electronic soft-start suppresses start-up torque, while anti-restart prevents motor spin-up if re-energized while switch is depressed.
  • Labyrinth Housing Dust Protection: Labyrinth seals and zig-zag epoxy coating protect armature coils and drive bearings from metal shavings and concrete dust.

What's Included

  • (1) Makita GA4553R 4-1/2" Paddle Switch Angle Grinder
  • (1) Permanently Attached 4-1/2" Tool-Less Wheel Guard (140N42-7)
  • (1) Rubberized Side Handle (158237-4)
  • (1) Inner Flange (224399-1)
  • (1) Lock Nut (224486-6)
  • (1) Lock Nut Wrench (782424-9)

Technical Specifications

Brand / Manufacturer Makita
Model / Part Number GA4553R
Motor Amperage & Voltage 11.0 Amps @ 120V AC / 60 Hz
No Load Operating Speed 11,000 RPM
Grinding Wheel Diameter 4.50 in. (114.3 mm / 4-1/2 in.)
Spindle Thread Size 5/8 in. - 11 UNC Standard Spindle
Switch Style & Safety Paddle Switch (Two-Stage Lock-Off / No Lock-On)
Safety Guard Type Non-Removable Permanently Attached Tool-Less Guard
Motor Electronics Soft-Start & Anti-Restart Protection Systems
Overall Tool Length 12.75 in. (323.85 mm / 12-3/4 in.)
Tool Net Weight 6.0 lbs (2.72 kg)
Shipping Total Weight 8.18 lbs (3.71 kg)
UPC Code 088381-887878
Pro-Tip: Depress the quick-guard lever to rotate the non-removable guard instantly to shield spark throw when switching positions from horizontal weld grinding to overhead beam chamfering.