Makita 4351FCT 6.3 Amp corded barrel grip jig saw featuring a die-cast aluminum base and rubberized handle for low-vibration scroll cutting.
Side profile view of the Makita 4351FCT barrel grip jig saw highlighting the 1-inch stroke length and tool-less T-shank blade clamp assembly.
Built-in LED work light illuminating the cut line on the Makita 4351FCT barrel grip jig saw during wood scribing for enhanced accuracy.
Operator guiding the low-vibration Makita 4351FCT barrel grip jig saw smoothly along a wood curve line to demonstrate cutting control.
Variable speed adjustment dial on the rear handle of the Makita 4351FCT jig saw set to control blade speed between 800 and 2,800 SPM.
Side selector lever on the Makita 4351FCT jig saw showing the 3 orbital stroke settings and straight-line cutting mode options.
Ergonomic barrel grip handle on the Makita 4351FCT corded jig saw providing close-to-work body positioning for detailed scroll cuts.
Demonstration of the spring-loaded tool-less blade ejection lever on the Makita 4351FCT jig saw for rapid T-shank blade changes.
Detailed close-up of the rear speed control wheel on the Makita 4351FCT jig saw showing speed setting 5 for aggressive cutting.
Close-up of the cast aluminum orbital stroke adjustment lever on the Makita 4351FCT jig saw body set for aggressive material removal.
Woodworker guiding a Makita 4351FCT barrel grip jig saw along a curved plywood layout line to demonstrate low-vibration scroll cutting control.
Makita 4351FCT barrel grip jig saw kit displayed with six T-shank blades and a non-marring shoe cover plate for tear-out free finish cuts.
Makita 4351FCT 6.3 Amp corded barrel grip jig saw featuring a die-cast aluminum base and rubberized handle for low-vibration scroll cutting.
Side profile view of the Makita 4351FCT barrel grip jig saw highlighting the 1-inch stroke length and tool-less T-shank blade clamp assembly.
Built-in LED work light illuminating the cut line on the Makita 4351FCT barrel grip jig saw during wood scribing for enhanced accuracy.
Operator guiding the low-vibration Makita 4351FCT barrel grip jig saw smoothly along a wood curve line to demonstrate cutting control.
Variable speed adjustment dial on the rear handle of the Makita 4351FCT jig saw set to control blade speed between 800 and 2,800 SPM.
Side selector lever on the Makita 4351FCT jig saw showing the 3 orbital stroke settings and straight-line cutting mode options.
Ergonomic barrel grip handle on the Makita 4351FCT corded jig saw providing close-to-work body positioning for detailed scroll cuts.
Demonstration of the spring-loaded tool-less blade ejection lever on the Makita 4351FCT jig saw for rapid T-shank blade changes.
Detailed close-up of the rear speed control wheel on the Makita 4351FCT jig saw showing speed setting 5 for aggressive cutting.
Close-up of the cast aluminum orbital stroke adjustment lever on the Makita 4351FCT jig saw body set for aggressive material removal.
Woodworker guiding a Makita 4351FCT barrel grip jig saw along a curved plywood layout line to demonstrate low-vibration scroll cutting control.
Makita 4351FCT barrel grip jig saw kit displayed with six T-shank blades and a non-marring shoe cover plate for tear-out free finish cuts.
Makita

Makita Barrel Grip Jig Saw 4351FCT 6.3 Amp 1 Inch Stroke Length (2800 SPM 3 Orbital Settings LED Light Anti Splinter Wood Metal Scroll Cutting)

Only 1 left
SKU: 4351FCT
$294.00 USD

Description

Makita Logo Logout

Makita 4351FCT 6.3 Amp Corded Barrel Grip Orbital Jig Saw

The Makita 4351FCT is a high-precision 6.3 Amp corded barrel grip jig saw engineered with electronic variable speed control from 800 to 2,800 SPM and a 1-inch stroke length for smooth, accurate scroll cuts across wood, steel, and aluminum sheet materials. Featuring 3 orbital settings plus straight cutting, a tool-less T-shank blade change mechanism, and a dynamically balanced motor delivering 40 percent reduced vibration, this 5.5-pound cutting tool maximizes control during intricate coping and scribing work. Equipped with a built-in LED light, integrated dust blower, soft start, and a die-cast aluminum base tilting up to 45 degrees left or right, it provides steady cutting stability for cabinetmakers, finish carpenters, and countertop fabricators.

Best Used For:

  • Precision Cabinetry & Molded Trim Coping: Executing low-vibration tight radius curves and coping joints in crown molding, baseboards, and cabinet face frames.
  • Laminate Countertop Sink Cutouts: Guiding smooth plunge cuts through 5-5/16 inch wood laminates using the anti-splinter insert to prevent face veneer tear-out.
  • Sheet Metal & Aluminum Fabrication: Cutting up to 3/8-inch steel plate and 25/32-inch aluminum stock cleanly with constant speed under heavy cutting load.

Key Performance & Safety Features

  • Dynamically Balanced Motor Architecture: Engineering counterweight system reduces tool vibration by 40 percent and lowers operating noise for enhanced accuracy.
  • 4-Position Orbital Cutting Switch: Provides 3 orbital power settings plus straight-line cutting to optimize material removal speed and edge finish quality.
  • Tool-Less T-Shank Blade Ejection: Fast spring-loaded lever system allows rapid blade replacement without touching hot, worn saw blades.
  • Electronic Constant Speed Control: Maintains steady blade stroke velocity under dense material loading to prevent binding and jagged cut lines.
  • Beveling Die-Cast Aluminum Shoe Base: Adjustable base plate swivels up to 45 degrees left or right with positive stops at 90 degrees for square cuts.
  • Integrated LED & Line-of-Sight Blower: Built-in work light and continuous dust blower clear wood chips away from the layout line for maximum line sight visibility.

What's Included

  • (1) Makita 6.3 Amp Barrel Grip Jig Saw (Model 4351FCT)
  • (2) 4-1/8" 9TPI Wood Cutting Jig Saw Blades (792529-7-1)
  • (2) 4-1/8" 9TPI HCS T-Shank Jig Saw Blades (792729-9-1)
  • (2) 3" 24TPI HSS Metal Cutting T-Shank Jig Saw Blades (792473-8-1)
  • (1) Anti-Splintering Insert (415524-7)
  • (1) Non-Marring Base Cover Plate (417852-6)
  • (1) Onboard Hex Wrench (783202-0)
  • (1) Heavy-Duty Tool Case (824809-4)

Technical Specifications

Brand Manufacturer Makita® USA
Model Part Number OEM SKU 4351FCT
Motor Amperage Rating 6.3 Amps / 120V AC 60Hz Corded
Length of Blade Stroke 1 inch (25-4/10 mm)
Strokes Per Minute Speed Range 800 - 2,800 SPM Variable Speed
Max Cutting Capacity at 90° (Wood) 5-5/16 inches (135 mm)
Max Cutting Capacity at 90° (Steel) 3/8 inches (10 mm)
Max Cutting Capacity at 90° (Aluminum) 25/32 inches (20 mm)
Blade Shank Type Compatibility Tang / T-Shank Blades Only
Bevel Base Adjustment Angle 45° Left or Right (Positive Stop at 90°)
Tool-Less Blade System Yes (Quick Lever Ejection)
Overall Tool Body Length 10-3/4 inches (273 mm)
Net Tool Weight 5-1/2 lbs (5.5 lbs / 2.5 kg)
Packaged Shipping Dimensions 3-78/100" D x 12-6/10" H x 14-57/100" W
Total Package Shipping Weight 9-11/100 lbs (9.11 lbs / 4.13 kg)
Universal Product Code UPC 088381-080880

Pro-Tip: Install the non-marring cover plate when cutting pre-finished laminate countertops or delicate hardwoods to prevent the metal shoe base from scratching finished surfaces.