Makita XLC07Z 18V LXT cordless canister vacuum featuring a compact carry handle and a flexible suction hose for portable jobsite debris extraction.
Feature diagram of the Makita XLC07Z highlighting 49 CFM airflow, 40-1/2 inch hose extension, 4-pound weight, and 40-minute runtime.
Makita XLC07Z 18V cordless canister vacuum equipped with a long, rigid crevice nozzle attachment for reaching tight gaps under car seats.
Makita XLC07Z vacuum configured in blower mode with the flexible hose connected to the rear port and a tapered blower nozzle attached.
Makita XLC07Z canister vacuum shown with the wide floor mat nozzle and padded shoulder strap installed for portable mobile cleaning.
Open side compartment of the Makita XLC07Z vacuum showing the paper filter bag housing and latching mechanism for quick dust bag changes.
Complete accessory layout for the Makita XLC07Z including soft brush, upholstery nozzle, floor mat nozzle, crevice tool, blower pipe, and strap.
Detailed close-up of the Makita soft brush attachment demonstrating both straight and right-angle bristle orientations for delicate dusting.
Makita XLC07Z 18V canister vacuum fitted with the soft brush extension wand for dusting sensitive vehicle dashboard vents and consoles.
Top handle control panel of the Makita XLC07Z showing the 3-speed electronic power selection button and separate OFF push button.
Makita XLC07Z 18V cordless canister vacuum equipped with a padded shoulder strap and wide seat nozzle for mobile interior vehicle detailing.
Control panel graphic on the Makita XLC07Z vacuum highlighting the 3-speed electronic power selector and separate off button.
Performance graphic demonstrating up to 40 minutes of continuous vacuuming runtime on a single charged 1.5Ah 18V LXT battery.
Portability graphic emphasizing the lightweight 4-pound design of the Makita XLC07Z canister vacuum for reduced user fatigue during cleaning.
Power graphic highlighting the 49 CFM airflow motor rating on the Makita XLC07Z cordless vacuum for heavy jobsite debris extraction.
Operator using the Makita XLC07Z cordless canister vacuum with a wide nozzle to clean dirt and debris off a rubber car floor mat.
Detailer using the Makita XLC07Z vacuum and bristle floor mat attachment to extract ground-in crumbs and dirt from vehicle carpet.
Makita XLC07Z 18V cordless vacuum resting on a car passenger seat with its padded shoulder strap, ready for vehicle cabin maintenance.
Makita XLC07Z 18V LXT cordless canister vacuum featuring a compact carry handle and a flexible suction hose for portable jobsite debris extraction.
Feature diagram of the Makita XLC07Z highlighting 49 CFM airflow, 40-1/2 inch hose extension, 4-pound weight, and 40-minute runtime.
Makita XLC07Z 18V cordless canister vacuum equipped with a long, rigid crevice nozzle attachment for reaching tight gaps under car seats.
Makita XLC07Z vacuum configured in blower mode with the flexible hose connected to the rear port and a tapered blower nozzle attached.
Makita XLC07Z canister vacuum shown with the wide floor mat nozzle and padded shoulder strap installed for portable mobile cleaning.
Open side compartment of the Makita XLC07Z vacuum showing the paper filter bag housing and latching mechanism for quick dust bag changes.
Complete accessory layout for the Makita XLC07Z including soft brush, upholstery nozzle, floor mat nozzle, crevice tool, blower pipe, and strap.
Detailed close-up of the Makita soft brush attachment demonstrating both straight and right-angle bristle orientations for delicate dusting.
Makita XLC07Z 18V canister vacuum fitted with the soft brush extension wand for dusting sensitive vehicle dashboard vents and consoles.
Top handle control panel of the Makita XLC07Z showing the 3-speed electronic power selection button and separate OFF push button.
Makita XLC07Z 18V cordless canister vacuum equipped with a padded shoulder strap and wide seat nozzle for mobile interior vehicle detailing.
Control panel graphic on the Makita XLC07Z vacuum highlighting the 3-speed electronic power selector and separate off button.
Performance graphic demonstrating up to 40 minutes of continuous vacuuming runtime on a single charged 1.5Ah 18V LXT battery.
Portability graphic emphasizing the lightweight 4-pound design of the Makita XLC07Z canister vacuum for reduced user fatigue during cleaning.
Power graphic highlighting the 49 CFM airflow motor rating on the Makita XLC07Z cordless vacuum for heavy jobsite debris extraction.
Operator using the Makita XLC07Z cordless canister vacuum with a wide nozzle to clean dirt and debris off a rubber car floor mat.
Detailer using the Makita XLC07Z vacuum and bristle floor mat attachment to extract ground-in crumbs and dirt from vehicle carpet.
Makita XLC07Z 18V cordless vacuum resting on a car passenger seat with its padded shoulder strap, ready for vehicle cabin maintenance.
Makita

Makita Cordless Canister Vacuum XLC07Z 18V LXT Bare Tool (49 CFM Airflow 3 Speed Flexible Hose Vehicle Interior Jobsite Debris Dust Cleanup)

Only 1 left
SKU: XLC07Z
$199.00 USD

Description

Makita Logo Logout

Makita XLC07Z 18V LXT Cordless Handheld Canister Vacuum Bare Tool

The Makita XLC07Z is an 18V LXT cordless handheld canister vacuum engineered with a high-output motor delivering 49 CFM airflow suction and 22 inches of static water lift for jobsite debris cleanup and vehicle interior detailing. Weighing 4 pounds with a battery, this portable extraction unit features 3 push-button speed settings, a flexible hose extending up to 40-1/2 inches, and a quiet 68 dB(A) operating noise level. Integrated with Star Protection Computer Controls, an LED low-battery alert light, and a dual-function blower attachment, it provides versatile dust extraction and blowing utility for service technicians, automotive detailers, and finish carpenters. **Battery and charger sold separately.

Best Used For:

  • Automotive Fleet & Vehicle Interior Detailing: Extracting dirt, sand, and pet hair from seat upholstery, floor carpets, and tight dashboard vents using specialized contoured nozzles.
  • Jobsite Workstation & Cabinet Dust Extraction: Cleaning sawdust, drywall residue, and trade debris from workbench surfaces, cabinet interiors, and drawer slides after installation.
  • Confined Equipment & Electronics Blower Maintenance: Converting to blower mode using the included rear attachment to blast dust out of HVAC grilles, tool cases, and sensitive machinery.

Key Performance & Safety Features

  • High-Output 49 CFM Suction Motor: Delivers 49 CFM airflow and 22 inches of static water lift for rapid pick-up of fine particles and heavy debris.
  • 3-Speed Electronic Power Selector: Intuitive push-button interface allows operators to adjust suction power to optimize battery runtime based on surface conditions.
  • 40-1/2 Inch Flexible Extension Hose: Expandable suction hose reaches under vehicle seats, deep footwells, and overhead cabinet corners without tilting the main vacuum body.
  • Quiet 68 dB(A) Sound Level Performance: Low noise motor architecture minimizes workplace sound disturbance during interior commercial maintenance.
  • Star Protection Computer Controls: Bi-directional communication technology monitors thermal status and current draw to safeguard against motor overloads and battery over-discharge.
  • Dual Vacuum and Blower Capability: Rear exhaust housing accepts a specialized blower attachment to quickly convert the vacuum into a directional dust blower.

What's Included

  • (1) Makita 18V LXT® Handheld Canister Vacuum (Model XLC07Z)
  • (1) Soft Brush (140H94-2)
  • (1) Upholstery Nozzle (140H95-0)
  • (1) Blower Nozzle Attachment (140J64-3)
  • (1) Shoulder Strap (162544-9)
  • (1) 13" Rubber Crevice Nozzle (422437-5)
  • (1) Floor Mat Nozzle (459056-4)
  • (1) Cloth Dust Bag (166084-9)
  • (1) Paper Filter Bag, 5/pk (198745-3)

Technical Specifications

Brand Manufacturer Makita® USA
Model Part Number OEM SKU XLC07Z
Operating Voltage Rating 18V DC Slide-Style Battery
Maximum Airflow Capacity 49 CFM (Cubic Feet Per Minute)
Static Water Lift Rating 22 inches (558-8/10 mm)
Working Sound Output Level 68 dB(A)
Max Continuous Runtime (1.5Ah) Up to 40 Minutes
Flexible Hose Extension Length 40-1/2 inches (1,028-7/10 mm)
Motor Technology Type Brushed Industrial Motor
Electronic Speed Settings 3 Push-Button Speeds plus OFF Switch
Overall Tool Dimensions (L x W x H) 13-5/8" x 5-7/16" x 8"
Net Tool Weight with Battery 4 lbs (1.81 kg)
Packaged Shipping Dimensions 8-86/100" D x 8-9/10" H x 16-14/100" W
Total Shipping Weight 5-82/100 lbs (5.82 lbs / 2.64 kg)
Universal Product Code UPC 088381-725903

Pro-Tip: Empty the cloth dust bag or replace the paper filter after extracting fine drywall dust to maintain full 49 CFM airflow and prevent thermal stress on the suction motor.