Makita XT297T 18V LXT 2-tool combo kit includes a hammer drill, 4-speed impact driver, two 5.0Ah batteries, rapid charger, and tote bag.
Makita XDT20 18V LXT brushless impact driver with a 1/4-inch hex chuck and belt clip for compact high-torque fastening.
Makita XPH14 18V LXT brushless 1/2-inch hammer drill with side handle and depth rod for heavy-duty masonry drilling.
Makita XDT20 18V impact driver diagram highlighting its 4.5-inch length, 360-degree LED light ring, 1590 in-lbs torque, and Assist Modes.
Makita XPH14 18V hammer drill features diagram showing its 7-inch length, 1250 in-lbs torque brushless motor, and 2-speed transmission.
Pair of Makita BL1850B 18V LXT 5.0Ah lithium-ion batteries featuring fuel gauge indicators for extended cordless tool runtime.
Makita DC18RC 18V LXT rapid optimum charger with active fan cooling system designed to fully charge 5.0Ah batteries in 45 minutes.
Makita XDT20 electronic control panel diagram detailing 4 speed settings up to 3600 RPM and specialized wood, bolt, and T-mode assist settings.
Side profile of the compact Makita XDT20 18V LXT brushless impact driver showing its ergonomic rubberized grip and belt clip.
Gloved hand operating the one-touch mode switching button on the head of the Makita XDT20 impact driver for rapid speed adjustments.
Hand tightening the all-metal 1/2-inch keyless ratcheting chuck on the Makita XPH14 hammer drill for maximum bit retention during heavy drilling.
Operator selecting high-speed gear mode 1 on the top-mounted 2-speed transmission switch of the Makita XPH14 hammer driver-drill.
Hand pressing the LED fuel gauge button on a Makita BL1850B 18V LXT 5.0Ah lithium-ion battery to verify charge level.
Base electronic control pad of the Makita XDT20 impact driver showing 4 speed indicators, assist mode controls, and metal belt clip attachment.
Technician wearing protective gloves selecting quick-shift electronic speed modes on the base panel of a Makita XDT20 impact driver.
Contractor using the Makita XPH14 18V hammer drill with side handle to bore a pilot hole through a vertical 2x4 wood framing stud.
Worker drilling downward through a bottom wall plate with the Makita XPH14 hammer drill using a spade bit and side handle for stability.
Tradesman kneeling to drive drywall screws into wall backing boards using the compact 18V Makita XDT20 LXT impact driver.
Contractor securing wall cement board panels using a cordless Makita XDT20 impact driver with LED workplace illumination.
Contractor driving a structural lag bolt into a wood stud using a Makita XDT20 impact driver equipped with a 360-degree LED light ring.
18V LXT® Brushless 4-Speed Impact Driver (XDT20) promotional video
MAKITA – The LXT® Advantage promotional video
Makita XT297T 18V LXT 2-tool combo kit includes a hammer drill, 4-speed impact driver, two 5.0Ah batteries, rapid charger, and tote bag.
Makita XDT20 18V LXT brushless impact driver with a 1/4-inch hex chuck and belt clip for compact high-torque fastening.
Makita XPH14 18V LXT brushless 1/2-inch hammer drill with side handle and depth rod for heavy-duty masonry drilling.
Makita XDT20 18V impact driver diagram highlighting its 4.5-inch length, 360-degree LED light ring, 1590 in-lbs torque, and Assist Modes.
Makita XPH14 18V hammer drill features diagram showing its 7-inch length, 1250 in-lbs torque brushless motor, and 2-speed transmission.
Pair of Makita BL1850B 18V LXT 5.0Ah lithium-ion batteries featuring fuel gauge indicators for extended cordless tool runtime.
Makita DC18RC 18V LXT rapid optimum charger with active fan cooling system designed to fully charge 5.0Ah batteries in 45 minutes.
Makita XDT20 electronic control panel diagram detailing 4 speed settings up to 3600 RPM and specialized wood, bolt, and T-mode assist settings.
Side profile of the compact Makita XDT20 18V LXT brushless impact driver showing its ergonomic rubberized grip and belt clip.
Gloved hand operating the one-touch mode switching button on the head of the Makita XDT20 impact driver for rapid speed adjustments.
Hand tightening the all-metal 1/2-inch keyless ratcheting chuck on the Makita XPH14 hammer drill for maximum bit retention during heavy drilling.
Operator selecting high-speed gear mode 1 on the top-mounted 2-speed transmission switch of the Makita XPH14 hammer driver-drill.
Hand pressing the LED fuel gauge button on a Makita BL1850B 18V LXT 5.0Ah lithium-ion battery to verify charge level.
Base electronic control pad of the Makita XDT20 impact driver showing 4 speed indicators, assist mode controls, and metal belt clip attachment.
Technician wearing protective gloves selecting quick-shift electronic speed modes on the base panel of a Makita XDT20 impact driver.
Contractor using the Makita XPH14 18V hammer drill with side handle to bore a pilot hole through a vertical 2x4 wood framing stud.
Worker drilling downward through a bottom wall plate with the Makita XPH14 hammer drill using a spade bit and side handle for stability.
Tradesman kneeling to drive drywall screws into wall backing boards using the compact 18V Makita XDT20 LXT impact driver.
Contractor securing wall cement board panels using a cordless Makita XDT20 impact driver with LED workplace illumination.
Contractor driving a structural lag bolt into a wood stud using a Makita XDT20 impact driver equipped with a 360-degree LED light ring.
18V LXT® Brushless 4-Speed Impact Driver (XDT20) promotional video
MAKITA – The LXT® Advantage promotional video
Makita

Makita Cordless Combo Kit XT297T 18V LXT 2 Piece 5.0Ah (1250 in lbs Hammer Drill 1590 in lbs Impact Driver Batteries Rapid Charger Tool Bag)

In stock
SKU: XT297T
$419.00 USD

Description

Makita Logo Logout

Makita XT297T 18V LXT Lithium-Ion Brushless Cordless 2-Piece Hammer Drill and Impact Driver Combo Kit with (2) 5.0Ah Batteries

The Makita XT297T 18V LXT Brushless Cordless 2-Piece Combo Kit is an industrial power tool system engineered for high-torque masonry drilling, structural timber driving, and heavy-duty metal fastening. Powered by two 18V 5.0Ah BL1850B lithium-ion batteries with Star Protection Computer Controls, this 14.95-pound jobsite kit combines the XPH14 1/2-inch hammer driver-drill (delivering 1,250 in-lbs of max torque and up to 31,500 BPM) with the XDT20 4-speed impact driver (producing 1,590 in-lbs of torque and up to 3,800 IPM). Equipped with Extreme Protection Technology (XPT) for moisture resistance, electronic assist modes to prevent screw cam-out, and a DC18RC Rapid Optimum Charger that recharges a 5.0Ah battery in 45 minutes, this kit provides contractors with continuous drilling and fastening performance.

Best Used For:

  • High-Torque Masonry & Concrete Drilling: Driving percussion carbide bits up to 1/2 inch into poured concrete and brick walls using 31,500 BPM hammer action.
  • Structural Timber & Frame Fastening: Driving heavy lag screws and long construction fasteners into dense structural lumber with 1,250 in-lbs of drill torque.
  • Controlled Sheet Metal Screwing: Fastening self-drilling screws into light and heavy gauge metal using dual Tightening Modes (T-mode) to eliminate thread stripping.

Key Performance & Safety Features

  • High-Output Brushless Motors: Electronically controlled motors optimize battery power usage for up to 50% longer runtime per battery charge.
  • XPH14 1/2" All-Metal Hammer Drill: Produces 1,250 in-lbs of torque with a 2-speed transmission (0-550 & 0-2,100 RPM) and an all-metal self-ratcheting chuck.
  • XDT20 4-Speed Impact Driver: 4-speed power selection (0-3,600 RPM & 0-3,800 IPM) provides 1,590 in-lbs of torque with a 360-degree LED light ring.
  • Assist Mode & Tightening Modes: A-mode prevents screw cam-out by starting slow, while T-modes optimize speed for self-drilling metal fasteners.
  • Extreme Protection Technology (XPT): Internal rubber seals divert dust, debris, and water away from critical electronic control boards.
  • Star Protection Computer Controls: Monitors current, voltage, and temperature in real-time to guard tools against overloading and overheating.

What's Included

  • (1) 18V LXT Brushless 1/2" Hammer Driver-Drill (XPH14Z)
  • (1) 18V LXT Brushless Quick-Shift Mode 4-Speed Impact Driver (XDT20Z)
  • (2) 18V LXT Lithium-Ion 5.0Ah Batteries with LED Fuel Gauge (BL1850B)
  • (1) 18V LXT Lithium-Ion Rapid Optimum Charger (DC18RC)
  • (1) Heavy-Duty Contractor Tool Bag

Technical Specifications

Brand / Manufacturer Makita
Model / Part Number XT297T
System Voltage 18V LXT Lithium-Ion
Battery Capacity & Type 5.0 Ah (BL1850B) Slide-Style Lithium-Ion
Battery Charge Time 45 Minutes (with DC18RC Rapid Charger)
Hammer Drill Torque (XPH14) 1,250 in-lbs (104.17 ft-lbs) Max Torque
Hammer Drill Speed / BPM 0-550 / 0-2,100 RPM; 0-31,500 BPM
Impact Driver Torque (XDT20) 1,590 in-lbs (132.5 ft-lbs) Max Torque
Impact Driver Speed / IPM 0-1,100 / 0-2,100 / 0-3,200 / 0-3,600 RPM; 0-3,800 IPM
Drill Chuck Size & Type 0.50 in. (1/2 in.) All-Metal Self-Ratcheting Chuck
Impact Chuck Type 0.25 in. (1/4 in.) Quick-Change Hex Shank
Tool Weights (with Battery) XPH14 Drill: 6.0 lbs (2.72 kg); XDT20 Driver: 3.4 lbs (1.54 kg)
Shipping Total Weight 14.95 lbs (6.78 kg)
UPC Code 197050-006929
Pro-Tip: Use the XDT20 impact driver's A-mode (Assist Mode) when driving long wood screws into hardwoods; the tool starts at a slow RPM until the threads catch to eliminate screw cross-threading before ramping up to full speed automatically.