Makita 9032 4.4 Amp 3/8-inch x 21-inch electric belt sander featuring a narrow arm for detail wood and metal grinding.
Makita 9032 detail belt sander kit box displaying the instruction manual, 3/8-inch arm assembly, and included 80-grit abrasive belts.
Speed control dial on the Makita 9032 belt sander adjusting surface speed from 980 to 5,600 feet per minute for material prep.
Demonstration of the quick-release belt replacement lever on the Makita 9032 detail sander arm for fast abrasive swaps.
Operator turning the tracking control knob on the Makita 9032 sander arm to center the 3/8-inch abrasive belt.
Diagram illustrating the 100-degree pivoting range of the Makita 9032 sanding arm for reaching confined interior angles.
Woodworker using the Makita 9032 detail sander to shape and smooth curved wooden spindle turnings on a workbench.
Tradesman operating the Makita 9032 belt sander to sand tight clearance gaps between wooden chair legs and rungs.
Makita 9032 belt sander with its arm pivoted to clean and blend internal corner weld joints on structural aluminum channel stock.
Makita 9032 3/8-inch x 21-inch detail belt sander resting on a wooden shop bench, fully assembled with an 80-grit belt.
Makita 9032 3/8-inch x 21-inch detail belt sander displayed with 80-grit aluminum oxide replacement belts for woodworking and metal filing.
Makita 9032 4.4 Amp 3/8-inch x 21-inch electric belt sander featuring a narrow arm for detail wood and metal grinding.
Makita 9032 detail belt sander kit box displaying the instruction manual, 3/8-inch arm assembly, and included 80-grit abrasive belts.
Speed control dial on the Makita 9032 belt sander adjusting surface speed from 980 to 5,600 feet per minute for material prep.
Demonstration of the quick-release belt replacement lever on the Makita 9032 detail sander arm for fast abrasive swaps.
Operator turning the tracking control knob on the Makita 9032 sander arm to center the 3/8-inch abrasive belt.
Diagram illustrating the 100-degree pivoting range of the Makita 9032 sanding arm for reaching confined interior angles.
Woodworker using the Makita 9032 detail sander to shape and smooth curved wooden spindle turnings on a workbench.
Tradesman operating the Makita 9032 belt sander to sand tight clearance gaps between wooden chair legs and rungs.
Makita 9032 belt sander with its arm pivoted to clean and blend internal corner weld joints on structural aluminum channel stock.
Makita 9032 3/8-inch x 21-inch detail belt sander resting on a wooden shop bench, fully assembled with an 80-grit belt.
Makita 9032 3/8-inch x 21-inch detail belt sander displayed with 80-grit aluminum oxide replacement belts for woodworking and metal filing.
Makita

Makita Electric Belt Sander 9032 3/8 x 21 Inch (4.4 Amp Motor 5600 SFPM Variable Speed 100 Degree Pivoting Arm Detail Wood Metal Grinding)

Only 1 left
SKU: 9032
$414.00 USD

Description

Makita Logo Logout

Makita 9032 4.4 Amp 3/8-Inch x 21-Inch Variable Speed Detail Belt Sander

The Makita 9032 is a compact 4.4 Amp detail belt sander designed to perform rapid material removal, fine joint scribing, and weld grinding in restricted clearance areas. Featuring an adjustable sanding arm that pivots 100 degrees and a variable speed dial delivering 980 to 5,600 feet per minute, this 3.5-pound electric power tool maintains constant rotational velocity under load. Built with an easy-turn tracking knob, a 4-5/16 inch maximum platen sanding length, and an 8.2-foot power cord, it provides precision control for woodworkers, sculptors, metal fabricators, and door installation technicians working in narrow gaps.

Best Used For:

  • Fine Woodworking & Custom Joinery: Scribing mortise joints, profiling curved wood carvings, and flush-sanding cabinet hardware recesses in tight corners.
  • Architectural Door Fitting & Hinge Prep: Trimming narrow wooden door edges, jamb mortises, and strike plate cutouts during installation.
  • Metal Fabrication & Weld Smoothing: Deburring narrow steel tubing interiors, blending localized weld seams, and shaping custom metal fabrications.

Key Performance & Safety Features

  • 100-Degree Pivoting Arm Assembly: Sanding arm swivels across a 100-degree arc to access deep recessed channels, mortises, and tight angles.
  • 4.4 Amp Constant Speed Motor: Electronic speed controller maintains constant belt speed under heavy material pressure to prevent stalling.
  • Variable Speed Adjustment Dial: Matches belt surface speed from 980 to 5,600 SFPM to suit heat-sensitive woods or dense metals.
  • Tool-Free Tracking Knob: Precision tracking adjustment knob allows operators to center the abrasive belt quickly without auxiliary tools.
  • Expanded Arm Interchangeability: Accepts optional 1/4-inch, 3/8-inch, and 1/2-inch arm assemblies to accommodate various joint widths.
  • Extended 8.2-Foot Power Cable: Flexible rubber power cord provides enhanced reach around workbench fixtures and large assemblies.

What's Included

  • (1) Makita 3/8" x 21" Detail Belt Sander (Model 9032)
  • (1) 3/8" Arm Assembly (125158-5)
  • (2) 3/8" x 21" 80-Grit Abrasive Belts (A-34469-1)

Technical Specifications

Brand Manufacturer Makita® USA
Model Part Number OEM SKU 9032
Motor Electrical Rating 4.4 Amps / 120V AC 60Hz Corded
Standard Included Belt Size 3/8 inches x 21 inches
Variable Belt Velocity Range 980 - 5,600 SFPM (Feet Per Minute)
Arm Pivoting Motion Range 100 Degrees Total Adjustment
Maximum Platen Sanding Length 4-5/16 inches (110 mm)
Power Supply Cord Length 8-2/10 feet (8.2 ft / 2.5 m)
Overall Tool Body Length 16-1/2 inches (419 mm)
Net Tool Weight 3-1/2 lbs (3.5 lbs / 1.6 kg)
Electronic Speed Control System Yes (Constant Speed Under Load)
Optional Arm Size Support 1/4 inch, 3/8 inch, 1/2 inch Assemblies
Packaged Shipping Dimensions 3-78/100" D x 7-87/100" H x 19-29/100" W
Total Package Shipping Weight 4-4/10 lbs (4.4 lbs / 2.0 kg)
Universal Product Code UPC 088381-041348

Pro-Tip: Lower the speed dial setting when working with non-ferrous metals or fine hardwoods to prevent surface scorching and extend abrasive belt lifespan.