Makita XWT17T 18V LXT cordless mid-torque impact wrench kit complete with two 5.0Ah batteries, rapid charger, and contractor bag.
Makita XWT17 18V cordless mid-torque impact wrench featuring a 1/2-inch friction ring anvil, brushless motor, and attached belt clip.
Makita XWT17 mid-torque impact wrench feature diagram detailing its 6-11/16-inch length, 740 ft-lbs torque, and 4-speed selection pad.
Compact 6.0-pound Makita XWT17 mid-torque impact wrench resting on a vehicle frame to highlight low operator fatigue during assembly.
Close-up of the Makita XWT17 electronic control panel showing 4 speed settings and auto-stop mode controls for precise fastening.
Mechanic using the Makita XWT17 mid-torque impact wrench with auto-stop mode to prevent over-tightening structural bolts.
Technician removing rusted lug nuts from a heavy equipment wheel using 740 ft-lbs of nut-busting torque from the Makita XWT17 impact wrench.
Operator tightening a chassis fastener with the compact 6-11/16-inch Makita XWT17 brushless mid-torque impact wrench.
Bright LED headlight positioned below the gear housing on the Makita XWT17 impact wrench to illuminate dim workspace fasteners.
Electronic base panel of the Makita XWT17 impact wrench displaying 4 speed power levels, LED light toggle, and auto-stop mode selectors.
Gloved mechanic using a Makita XWT17 18V impact wrench with an impact socket to tighten wheel lug nuts on a custom sports car.
Technician driving steel frame bolts on heavy agricultural equipment using a Makita XWT17 1/2-inch mid-torque impact wrench.
Operator torquing rusted chassis bracket bolts on farm machinery using the 520 ft-lbs fastening power of the Makita XWT17 impact wrench.
Commercial equipment technician using a Makita XWT17 cordless impact wrench to remove oil pan drain plug bolts on a heavy vehicle.
Auto mechanic loosening automotive wheel lug nuts in a shop using a Makita XWT17 18V LXT brushless mid-torque impact wrench.
Side profile of the compact 6.0-pound Makita XWT17 mid-torque impact wrench equipped with an impact socket and 5.0Ah 18V battery.
Ironworker securing structural steel frame bolts on an elevated construction site using a Makita XWT17 1/2-inch impact wrench.
Auto-Stop Mode Explained promotional video
Introducing Makita “I Build Because” promotional video
Makita XWT17T 18V LXT cordless mid-torque impact wrench kit complete with two 5.0Ah batteries, rapid charger, and contractor bag.
Makita XWT17 18V cordless mid-torque impact wrench featuring a 1/2-inch friction ring anvil, brushless motor, and attached belt clip.
Makita XWT17 mid-torque impact wrench feature diagram detailing its 6-11/16-inch length, 740 ft-lbs torque, and 4-speed selection pad.
Compact 6.0-pound Makita XWT17 mid-torque impact wrench resting on a vehicle frame to highlight low operator fatigue during assembly.
Close-up of the Makita XWT17 electronic control panel showing 4 speed settings and auto-stop mode controls for precise fastening.
Mechanic using the Makita XWT17 mid-torque impact wrench with auto-stop mode to prevent over-tightening structural bolts.
Technician removing rusted lug nuts from a heavy equipment wheel using 740 ft-lbs of nut-busting torque from the Makita XWT17 impact wrench.
Operator tightening a chassis fastener with the compact 6-11/16-inch Makita XWT17 brushless mid-torque impact wrench.
Bright LED headlight positioned below the gear housing on the Makita XWT17 impact wrench to illuminate dim workspace fasteners.
Electronic base panel of the Makita XWT17 impact wrench displaying 4 speed power levels, LED light toggle, and auto-stop mode selectors.
Gloved mechanic using a Makita XWT17 18V impact wrench with an impact socket to tighten wheel lug nuts on a custom sports car.
Technician driving steel frame bolts on heavy agricultural equipment using a Makita XWT17 1/2-inch mid-torque impact wrench.
Operator torquing rusted chassis bracket bolts on farm machinery using the 520 ft-lbs fastening power of the Makita XWT17 impact wrench.
Commercial equipment technician using a Makita XWT17 cordless impact wrench to remove oil pan drain plug bolts on a heavy vehicle.
Auto mechanic loosening automotive wheel lug nuts in a shop using a Makita XWT17 18V LXT brushless mid-torque impact wrench.
Side profile of the compact 6.0-pound Makita XWT17 mid-torque impact wrench equipped with an impact socket and 5.0Ah 18V battery.
Ironworker securing structural steel frame bolts on an elevated construction site using a Makita XWT17 1/2-inch impact wrench.
Auto-Stop Mode Explained promotional video
Introducing Makita “I Build Because” promotional video
Makita

Makita Mid Torque Impact Wrench Kit XWT17T 18V LXT 1/2 Inch Brushless (520 ft lbs Torque Friction Ring Anvil Two 5.0Ah Batteries Charger)

Only 3 left
SKU: XWT17T
$569.00 USD

Description

Makita Logo Logout

Makita XWT17T 18V LXT Brushless Cordless 4-Speed Mid-Torque 1/2-Inch Square Drive Impact Wrench Kit

The Makita XWT17T 18V LXT Brushless Cordless 4-Speed Mid-Torque 1/2-Inch Impact Wrench Kit is a high-efficiency fastening solution engineered for automotive wheel service, steel erection, and industrial equipment maintenance. Powered by an electronically controlled brushless motor delivering 520 ft-lbs of maximum fastening torque and 740 ft-lbs of nut-busting breakaway torque, this 6.0-pound tool features a compact 6-11/16 inch length to operate inside restricted chassis quarters. Outfitted with a 4-speed power selection switch, 3 forward and 3 reverse auto-stop modes, a friction ring anvil for fast socket swaps, and two 18V 5.0Ah BL1850B lithium-ion batteries that recharge in 45 minutes on the included DC18RC rapid charger, this tool delivers portable bolt tightening power with Extreme Protection Technology (XPT) for dust and water resistance.

Best Used For:

  • Automotive Suspension & Wheel Service: Removing stubborn lug nuts and suspension arm bolts in tight wheel wells without using restrictive air hoses.
  • Structural Steel & Frame Assembly: Driving medium-diameter structural fasteners and lag screws into timber and steel building frameworks.
  • Precision Equipment Fastening: Utilizing auto-stop rotation modes to prevent over-tightening or stripping delicate machinery thread passes.

Key Performance & Safety Features

  • BL Brushless Motor Architecture: Delivers 520 ft-lbs of fastening torque and 740 ft-lbs of nut-busting torque with up to 50% longer runtime per charge.
  • 4-Speed Power Selection Switch: Electronic speed control (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM) matches output force to the application.
  • Auto-Stop Rotation Control: Features 3 forward and 3 reverse auto-stop modes that halt rotation once fasteners are loosened or seated to protect threads.
  • Friction Ring Drive Anvil: Heavy-duty 1/2-inch square drive hog ring anvil enables fast, secure socket retention and rapid manual socket changes.
  • Extreme Protection Technology (XPT): Internal protective rubber seals divert jobsite dust and water away from internal electronics.
  • Star Protection Computer Controls: System communication technology monitors heat, current, and voltage in real time to prevent overloading and overheating.

What's Included

  • (1) 18V LXT Brushless 4-Speed Mid-Torque 1/2" Impact Wrench Bare Tool (XWT17Z)
  • (2) 18V LXT Lithium-Ion 5.0Ah Batteries with Fuel Gauge (BL1850B)
  • (1) 18V LXT Lithium-Ion Rapid Optimum Fast Battery Charger (DC18RC)
  • (1) Heavy-Duty Contractor Tool Bag

Technical Specifications

Brand / Manufacturer Makita Industrial Power Tools
Model / Part Number XWT17T
System Voltage & Battery Type 18V LXT Lithium-Ion (Two 5.0Ah BL1850B Included)
Drive Tang Interface 0.50 in. (1/2 in.) Square Drive
Anvil Retaining Style Friction Ring (Hog Ring Anvil)
Maximum Fastening Torque 520 ft-lbs (6,240 in-lbs / 700 N·m)
Maximum Nut-Busting Torque 740 ft-lbs (8,880 in-lbs / 1,000 N·m)
4-Speed No Load Speed Ranges 0 - 500 / 0 - 1,200 / 0 - 1,900 / 0 - 2,200 RPM
4-Speed Impact Frequencies 0 - 1,000 / 0 - 1,700 / 0 - 2,400 / 0 - 2,700 IPM
Battery Charge Time 45 Minutes or Less (DC18RC Fast Charger)
Overall Tool Length 6.6875 in. (169.86 mm / 6-11/16 in.)
Tool Net Operating Weight 6.0 lbs (2.72 kg with BL1850B battery)
Shipping Total Weight 13.0 lbs (5.90 kg)
UPC Code 088381-723855
Pro-Tip: Use reverse auto-stop mode when backing off wheel lug nuts; the impact wrench will automatically shut off rotational force immediately after breaking thread friction so nuts stay inside the socket rather than dropping onto the floor.