Makita Cordless Nibbler XNJ01Z 18V LXT 16 Gauge Bare Tool (1900 SPM 360 Degree Rotating Die Sheet Metal Corrugated Roofing Cutting Tool)
Couldn't load pickup availability
Makita XNJ01Z 18V LXT Lithium-Ion 16-Gauge Cordless Sheet Metal Nibbler - Bare Tool
The Makita XNJ01Z 18V LXT 16-Gauge Cordless Nibbler executes distortion-free profile cutting across 16-gauge mild steel, 18-gauge stainless steel, and 12-gauge aluminum sheet stock. Driven by an industrial high-torque motor producing 1,900 strokes per minute (SPM), this metal cutting tool incorporates a 360-degree rotating die holder to maneuver smoothly across corrugated metal decking, standing seam roof valleys, and tight architectural radii down to a 1-3/4-inch inner curve. Integrated downward chip evacuation directs metal waste below the workpiece to protect finished surfaces, while electronic Anti-Restart Protection and Star Protection Computer Controls safeguard internal circuitry during heavy commercial HVAC and metal roofing installations.
**Battery and charger sold separately.
Best Used For:
- Corrugated Metal Decking & Roofing: Slicing roof valley flashings, corrugated ribs, and architectural standing seam panels without bending or scratching prepainted surfaces.
- HVAC Duct & Radius Cutouts: Nibbling tight circular take-off openings and rectangular register transitions down to a 1-3/4-inch inside turning radius.
- Stainless Enclosure & Cabinet Sizing: Trimming 18-gauge stainless steel electrical panels and machinery guards without thermal edge distortion or spark hazards.
Key Performance & Safety Features
- 360-Degree Fully Rotatable Die: Die holder indexes through a complete 360-degree rotation to match cutting orientation across complex corrugated panel contours.
- High-Speed 1,900 SPM Motor: High-performance motor provides fast cutting feed rates across heavy sheet stock without bogging down.
- Downward Waste Ejection: Discharges spent metal chips beneath the workpiece, preventing scratching on pre-finished roof decking and sheet metal.
- Anti-Restart Electronic Protection: Engineered motor safety circuit prevents accidental startup when sliding in a fresh battery with the switch engaged.
- Star Protection Computer Controls: On-board communication monitors thermal thresholds, current draw, and over-discharge to protect tool and battery life.
- Built-In Sheet Thickness Gauge: Integrated measuring slots on the die holder allow immediate confirmation of sheet metal gauge before initiating the cut.
What's Included
- (1) Makita XNJ01Z 18V LXT 16-Gauge Cordless Nibbler (Bare Tool)
- (1) Punch (Pre-Installed)
- (1) Die (Pre-Installed)
- (1) Die Holder (Pre-Installed)
- (1) Hex Wrench
- (1) Wrench
Technical Specifications
| Specification | Detail |
|---|---|
| Model Number | XNJ01Z |
| Voltage Platform | 18V LXT Lithium-Ion |
| Strokes Per Minute | 1,900 SPM |
| Mild Steel Capacity (400 N/mm²) | 16 Gauge (0.063 in / 1.6 mm) |
| Stainless Steel Capacity (600 N/mm²) | 18 Gauge (0.048 in / 1.2 mm) |
| Aluminum Capacity (200 N/mm²) | 12 Gauge (0.098 in / 2.5 mm) |
| Minimum Inside Cutting Radius | 1.75 in (1-3/4 in / 45 mm) |
| Minimum Outside Cutting Radius | 2.00 in (2 in / 50 mm) |
| Die Holder Rotation | 360° Multi-Position Rotation |
| Overall Length | 12.375 in (12-3/8 in) |
| Tool Weight (with Battery) | 4.8 lbs |
| UPC Identifier | 088381672184 |
Pro-Tip: Apply a light line of cutting fluid along stainless steel cut paths and rotate the die head 90 degrees when trimming corrugated decking ribs; proper head orientation ensures the die clears vertical panel flutes without binding.