The Makita XT289PT 18V LXT Brushless 2-piece cordless combo kit featuring a heavy-duty hammer driver-drill, a 7-1/4 inch circular saw, two 5.0Ah batteries, a dual-port rapid charger, and a professional contractor tool bag.
Perspective view of the Makita 18V LXT Brushless Hammer Driver-Drill showcasing its all-metal gear housing, side handle for high-torque control, and the integrated LED work light.
Close-up of the Makita 18V LXT Brushless 7-1/4 inch circular saw highlighting the magnesium base, large cutting capacity, and ergonomic handle design for precision wood cutting.
A Makita 18V LXT Lithium-Ion 5.0Ah battery pack (BL1850B) featuring an integrated LED fuel gauge to monitor charge levels during demanding jobsite tasks.
The Makita DC18RD 18V LXT Dual Port Rapid Optimum Charger designed to charge two 5.0Ah batteries simultaneously in just 45 minutes to minimize jobsite downtime.
Informative graphic showing a hand checking the integrated LED battery charge level indicator on a Makita 18V 5.0Ah battery, demonstrating efficiency and charge monitoring.
The Makita dual port rapid charger with two 18V 5.0Ah batteries docked, illustrating the technology used to charge two batteries simultaneously for continuous cordless power.
A professional contractor using the Makita 18V LXT Brushless 7-1/4 inch circular saw to cut structural timber on a jobsite, demonstrating the tool's ergonomic balance and cutting power.
A worker utilizing the high-torque Makita 18V Hammer Driver-Drill with a spade bit to drill into structural wood framing on an active construction site.
Close-up action shot of the Makita cordless circular saw cutting through a sheet of plywood, showcasing the precision and high-speed performance of the 18V LXT Brushless motor.
Makita 18V LXT® Dual Port Rapid Optimum Charger (DC18RD) promotional video
MAKITA – The LXT® Advantage promotional video
The Makita XT289PT 18V LXT Brushless 2-piece cordless combo kit featuring a heavy-duty hammer driver-drill, a 7-1/4 inch circular saw, two 5.0Ah batteries, a dual-port rapid charger, and a professional contractor tool bag.
Perspective view of the Makita 18V LXT Brushless Hammer Driver-Drill showcasing its all-metal gear housing, side handle for high-torque control, and the integrated LED work light.
Close-up of the Makita 18V LXT Brushless 7-1/4 inch circular saw highlighting the magnesium base, large cutting capacity, and ergonomic handle design for precision wood cutting.
A Makita 18V LXT Lithium-Ion 5.0Ah battery pack (BL1850B) featuring an integrated LED fuel gauge to monitor charge levels during demanding jobsite tasks.
The Makita DC18RD 18V LXT Dual Port Rapid Optimum Charger designed to charge two 5.0Ah batteries simultaneously in just 45 minutes to minimize jobsite downtime.
Informative graphic showing a hand checking the integrated LED battery charge level indicator on a Makita 18V 5.0Ah battery, demonstrating efficiency and charge monitoring.
The Makita dual port rapid charger with two 18V 5.0Ah batteries docked, illustrating the technology used to charge two batteries simultaneously for continuous cordless power.
A professional contractor using the Makita 18V LXT Brushless 7-1/4 inch circular saw to cut structural timber on a jobsite, demonstrating the tool's ergonomic balance and cutting power.
A worker utilizing the high-torque Makita 18V Hammer Driver-Drill with a spade bit to drill into structural wood framing on an active construction site.
Close-up action shot of the Makita cordless circular saw cutting through a sheet of plywood, showcasing the precision and high-speed performance of the 18V LXT Brushless motor.
Makita 18V LXT® Dual Port Rapid Optimum Charger (DC18RD) promotional video
MAKITA – The LXT® Advantage promotional video
Makita

Makita Tool Combo Kit XT289PT 18V LXT Brushless 2 Piece Hammer Drill 7-1/4 Inch Circular Saw (1250 Inch Pounds Torque Two 5.0Ah Batteries Bag)

Only 3 left
SKU: XT289PT
$575.00 USD

Description

Makita Logo Logout

Contractor-Grade 18V LXT Brushless 2-Piece Cordless Combo Kit with 1,250 In.-Lbs. Hammer Drill, 7-1/4-Inch 5,100 RPM Circular Saw, and Two 5.0Ah Batteries

The Makita XT289PT 18V LXT Brushless Cordless 2 Piece Combo Kit Hammer Driver Drill and 7-1/4 Inch Circular Saw 5.0Ah Batteries High Torque delivers specialized heavy structural building utility and exceptional field framing efficiency across demanding commercial timber construction, multi-tier residential framing layouts, and industrial facility remodeling tasks. Engineered with high-efficiency BL brushless motors, this high-performance layout tool assortment includes a 1/2-inch hammer driver-drill generating a massive 1,250 in.-lbs. of fastening torque alongside a dual-battery 7-1/4 inch circular saw spinning at 5,100 RPM to mimic corded tool capability completely. This professional contractor solution resolves slow hole-boring stalls in dense laminated veneer timber, binding blade kickbacks on thick framing lumber, and environmental moisture failures on unpredictable exterior structures by combining advanced Extreme Protection Technology (XPT) internal labyrinth seals with a 2-9/16 inch deep cutting threshold at 90 degrees, Star Protection Computer Controls, and dual-port 45-minute fast charging cells. Outfitted with an essential heavy-duty canvas transport gear bag, a balanced 6.0 lbs drill chassis, and a stable 12.4 lbs circular saw footprint, this robust cordless hardware pair optimizes subcontractor turnaround speed metrics during deep lag bolt driving runs, continuous structural timber joist felling, and high-volume masonry boring loops.

Best Used For:

  • Structural Lumber Framing: Slicing cleanly through 3x thick dense building joists, micro-lam beams, and laminated timber plates in a single pass single-handedly without engine drag loops.
  • Heavy Masonry Boring: Drilling high-volume pilot paths natively through commercial brick walls, exterior concrete block surfaces, and tough mortar fields using the high-impact hammer setting.
  • High-Torque Hardware Driving: Fastening oversized structural lag bolts, ledger board hardware fasteners, and framing anchor tracking units firmly onto demanding job site foundations.

Key Performance & Safety Features

  • 1,250 In.-Lbs. Drill Torque: Premium heavy-duty 4-pole motor configuration isolates extreme material resistance loops completely, transferring massive rotational forces natively into metal or wood.
  • 5,100 RPM Saw Blade Path: High-velocity brushless motor assembly maintains stable rotational momentum, ensuring crisp linear cuts through abrasive structural sheets.
  • Extreme Protection Seals (XPT): Labyrinth internal routing pathways deflect incoming rain droplets and fine job site concrete dust vectors away from core electronic switchboards.
  • Star Protection Computer Sync: Real-time electronic communication tracking loops prevent early circuit failure by shielding the tool frame from overloading, over-discharging, and overheating.
  • Dual-Port Rapid Charge: Advanced cell charging management optimizes thermal dissipation to restore both 5.0Ah lithium slide batteries natively within a brief 45-minute cycle window.

What's Included

  • (1) Makita 18V LXT® Brushless 1/2-Inch Hammer Driver-Drill (XPH07Z)
  • (1) Makita 18V LXT® Brushless 7-1/4-Inch Circular Saw (XSH06Z)
  • (2) Makita 18V LXT® Lithium-Ion 5.0Ah Advanced Slide Batteries (BL1850B)
  • (1) Makita 18V LXT® Lithium-Ion Dual-Port Rapid Optimum Smart Charger (DC18RD)
  • (1) Heavy-Duty Multi-Compartment Industrial Canvas Storage Tool Bag

Technical Specifications

Specification Value
Brand Name Makita
Model Number XT289PT
System Battery Voltage Rating 18V DC LXT Platform
Packaged Battery Cell Capacity 5.0 Ah (Two Units Included)
Product Classification Type 2-Piece Brushless Cordless Combo Kit
Operational Motor Architecture BL™ High-Efficiency Brushless Motor System
Hammer Drill Maximum Fastening Torque 1,250 in.-lbs.
Hammer Drill Velocity Matrix 0 - 550 / 0 - 2,100 RPM Variable Speed
Circular Saw Blade Capacity Size 7-1/4 in. Diameter Base
Circular Saw Maximum Speed Index 5,100 RPM No-Load Frequency
Circular Saw Cutting Capacity at 90° 2-9/16 in.
Standard Battery Charge Period 45 Minutes via Dual-Port Station
Target Application Substrates Dense Timbers, Framing Lumber, Mild Steel, Concrete, Masonry Block
Net Hammer Drill Assembly Weight 6.0 lbs. (With attached battery pack)
Net Circular Saw Assembly Weight 12.4 lbs. (With attached battery packs)
Total Multi-Pack Shipping Weight 32.41 lbs.

Pro-Tip: When deploying the 7-1/4 inch circular saw on structural bevel tracks, apply a clean mist of multi-purpose sizing compound down the alignment plate tracking slot. Lowering friction loops against the guide fence protects tracking accuracy and keeps the 5,100 RPM brushless motor cutting at absolute throughput capacity.