Bostitch Framing Nails RH-S10DR120HDG 3 Inch 11 Gauge 4000 Pack (21 Degree Plastic Strip Ring Shank HDG Full Round Head Pneumatic Fastener Tool)

Bostitch RH-S10DR120HDG 3-Inch 11-Gauge Galvanized Ring Shank Framing Nails (4,000-Count Master Pack)

The Bostitch RH-S10DR120HDG 3-Inch 11-Gauge Galvanized Ring Shank Framing Nails fasten structural timber framing, exterior wall sheathing, floor joists, and tongue-and-groove subflooring. Engineered from 0.120-inch high-tensile carbon steel wire with a heavy-duty galvanized protective coating, these full round head fasteners provide high holding power and withdrawal resistance in pressure-treated lumber and exterior building assemblies. Collated on durable 21-degree plastic strips with precision diamond penetration points, this 4,000-count master pack delivers smooth, jam-free cyclic feeding across all standard 21-degree pneumatic and cordless framing nailers to satisfy strict seismic and high-wind structural building codes.

Best Used For:

• Structural Wall & Roof Framing: Nailing 2x4 and 2x6 dimensional framing lumber, top plates, corner posts, and truss connections with full code-compliant pull-through resistance.
• Subfloor & Joist Fastening: Locking down 3/4-inch tongue-and-groove OSB or plywood subflooring panels into engineered floor joists to permanently eliminate floor squeaks.
• Exterior Sheathing & Pressure-Treated Decks: Pinning exterior plywood sheathing, siding backers, and pressure-treated decking framing with long-term atmospheric corrosion protection.

Key Performance & Safety Features

• Annular Ring Shank Geometry: Interlocking series of raised rings bites into wood fibers to provide maximum withdrawal holding power under dynamic loads.
• Hot-Dip Galvanized Coating: Exterior-rated zinc barrier shields the steel core from corrosion and chemical degradation in ACQ pressure-treated lumber.
• Full Round Head Design: Delivers complete perimeter clamping force against timber sheathing to meet international residential and commercial building codes (IRC/IBC).
• Rigid 21-Degree Plastic Strip Collation: Impact-resistant collation strips hold fasteners securely in damp weather and fragment cleanly during firing to prevent tool jams.
• Precision Diamond Chisel Points: Sharp entry points separate lumber grain cleanly without splitting dense framing studs or dry joist edges.
• 4,000-Count Master Contractor Carton: High-volume pack keeps production framing crews operating efficiently with fewer box replenishments on site.

What's Included

• (1) Master Carton of 4,000 Bostitch RH-S10DR120HDG 3" x 0.120" Galvanized Ring Shank 21° Plastic Collated Framing Nails

Technical Specifications

Pro-Tip: Calibrate your pneumatic nailer's operating line pressure to 90–100 PSI so the full round head sets flush without over-driving through the top OSB veneer layer, preserving the maximum pull-through holding strength of the ring shank.