PRO-TEC 215 Amp Dual Voltage 120/240V Multi-Process Welding System 215MP MIG Stick Lift TIG Welder for Fabrication and Repair

Unleash Multi-Process Power: PRO-TEC 215MP Dual Voltage MIG, Stick, & Lift TIG Welder System

The PRO-TEC 215MP Multi Process Welding System is the ultimate all-in-one solution for the modern fabricator. Designed for versatility and portability, this machine handles MIG, Flux Cored, Stick, and Lift TIG processes with ease, all from a single unit. Its innovative multi-voltage 120V to 240V input capability means you can truly weld anything, anywhere—from your garage workbench to a remote jobsite. Featuring advanced smart technology and a large, intuitive color display, the 215MP simplifies setup and operation, allowing both hobbyists and seasoned contractors to achieve professional-grade welds with exceptional efficiency.

Key Features for Welding Versatility

• Flexible Multi-Process System: Handles MIG (GMAW), Flux Cored (FCAW), Stick (SMAW), and Lift TIG (GTAW) welding with seamless transitions.
• Dual Voltage Input: Automatically detects and works with both 120V and 240V power sources for maximum jobsite compatibility.
• Smart Parameter Presets: Features pre-setting of optimized welding parameters, ensuring easy and quick setup for various materials and gases.
• Intuitive Color Display: Large, full-color interface loaded with advanced features to make operation and fine-tuning intuitive.
• High Output & Duty Cycle: Delivers up to 215 Amps at a robust 25% duty cycle (MIG, 208-240V), providing ample power for light fabrication and repair.
• Program Memory: Allows you to Save and Recall up to nine of your favorite weld programs for repeatable results and faster project turnaround.
• Durable Construction: Rated IP23S, making it suitable for both indoor and outdoor use.

What's Included

• PRO-TEC® 215MP Power Supply (Part No: G1621500)
• 10 ft (3 m) Power Cord & NEMA 5-20P 250V AC Plug
• Electrode Holder with 10 ft (3 m) Lead (for Stick Welding)
• Ground Clamp with 10 ft (3 m) Lead
• 215 Amp MIG Gun with 10 ft (3 m) Cable & .030” Contact Tip
• Adapter Plug & Cable – 250V/50 Amp to 120V/15 Amp
• 17 Style TIG Torch and Accessories, 50 mm Dinse with 12.5 ft (3.8 m) Lead
• Argon Flowgauge Regulator & 12.5 ft (3.8 m) Gas Hose
• Drive Rolls: .023”/.030” V Groove (Installed) and .030”/.035” for Flux Cored Wire
• Bonus Contact Tips (1 ea): .023” / .035”
• 4 General Purpose Electrodes (E6013)
• Operator Manual

Applications

The PRO-TEC 215MP is the perfect welding system for: Farms & Ranches, Maintenance & Repair, Auto Repair, Sheet Metal & Light Fabrication, On-Site & Portable Welding, and dedicated Hobbyists (DIY).

Specifications Table