Rolair Air Compressor V5180K30B-19 5 HP 80 Gallon New-Old-Stock (15.3 CFM @ 175 PSI Two Stage Dual Voltage 208V 230V Factory Magnetic Starter ASME Tank Pickup)
Shipping Quote Required
Request a Shipping QuoteCouldn't load pickup availability
Rolair V5180K30B-19 5 HP 80-Gallon Two-Stage Stationary Air Compressor
Call or Email for Availability and Shipping:
281-351-2211 - Sales@HilltopTool.com
The Rolair V5180K30B-19 5 HP 80-Gallon Two-Stage Air Compressor is a stationary industrial pneumatic power system engineered for operating commercial sandblasters, body shop paint sprayers, heavy-duty impact wrenches, and rotary air tools. Powered by a 5 HP 1,750 RPM electric motor with thermal reset overload protection, this two-stage compressor delivers 15.3 CFM at 175 PSI maximum operating pressure. Outfitted with an 80-gallon vertical ASME-certified air storage tank, a dual-voltage 208V/230V single-phase electrical setup, a factory-installed magnetic starter, a cast iron two-cylinder pump, and splash lubrication with a 47-ounce oil capacity, this 495-pound system executes shop air distribution.
Best Used For:
- Commercial Auto Body & Paint Spraying: Maintaining continuous 15.3 CFM airflow at 175 PSI for high-volume low-pressure (HVLP) paint spray guns.
- Industrial Sandblasting & Media Stripping: Powering pressure abrasive blasters continuously without pressure drop or cycle interruption.
- Multi-Bay Pneumatic Shop Tool Lines: Supplying compressed air lines for simultaneous operation of 3/4-inch impact wrenches, air ratchets, and die grinders.
Key Performance & Safety Features
- Two-Stage Cast Iron Compression Pump: Heavy-duty two-stage pump design produces a maximum operating pressure of 175 PSI for high-demand tools.
- Factory-Installed Magnetic Motor Starter: Pre-wired magnetic starter shields motor windings from electrical voltage spikes and current overloads.
- 80-Gallon Vertical ASME-Certified Tank: Massive air reservoir stores high-volume compressed air while maximizing shop floor space efficiency.
- Dual-Voltage 208V/230V Single-Phase Motor: Operates at 25.6 Amps (230V) to integrate into commercial single-phase electrical supply lines.
- Automatic Loadless Unloading Valve: Discharges head pressure upon shutdown to ensure smooth, loadless motor restarts.
- Thermal Reset Overload Motor Protection: Automatically cuts power during thermal overload conditions to prevent motor coil burnout.
What's Included
- (1) Rolair V5180K30B-19 5 HP 80-Gallon Two-Stage Stationary Air Compressor
- (1) Factory-Installed Magnetic Starter Assembly
- (1) Heavy-Duty Air Intake Filter/Silencer with Replaceable Element
Available for pickup at our Tomball, TX location:
30702 State Highway 249
Tomball, Texas 77375
Monday-Friday 7am-5pm CST
Saturday 7am-1pm CST
Technical Specifications
| Brand / Manufacturer | ROLAIR Systems |
| Model / Part Number | V5180K30B-19 |
| Motor Horsepower Rating | 5.0 HP |
| Compressed Air Delivery Output | 15.3 CFM @ 175 PSI |
| Air Receiver Tank Volume Capacity | 80 Gallons (ASME Certified Vertical Tank) |
| Compression Pump Architecture | Two-Stage Cast Iron Double-Cylinder Pump |
| Electrical Voltage / Phase | 208V / 230V AC Single-Phase (1 PH) |
| Maximum Operating Pressure | 175 PSI |
| Full Load Amperage Draw (230V) | 25.6 Amps |
| Motor Rotational Speed | 1,750 RPM |
| Pump Crankcase Oil Capacity | 47 oz. (Splash Lubricated) |
| Total System Shipping Weight | 495.0 lbs (224.53 kg) |
Pro-Tip: Drain the condensed water from the bottom ASME tank valve daily after shop shutdown; removing water accumulation prevents internal tank corrosion and preserves full 80-gallon air storage capacity.