Seal Fast Camlock Fitting DA600AL45 6 Inch Type DA (Female Coupler to Male Adapter 45 Degree Elbow Aluminum Fluid Hose Industrial Quick Joint)
Couldn't load pickup availability
Seal Fast DA600AL45 6-Inch Type DA Aluminum Female Camlock Coupler to Male Camlock Adapter 45-Degree Elbow
The Seal Fast DA600AL45 6-Inch Type DA Aluminum 45-Degree Cam and Groove Elbow directs high-capacity fluid transfer lines, flood dewatering hoses, and municipal pump headers along gradual angles without severe line kinking or flow restriction. Manufactured from lightweight, corrosion-resistant cast aluminum alloy with heavy-duty forged brass locking cam arms and stainless steel pivot pins, this large-diameter spool fitting features a 6-inch female quick-connect camlock socket on one end and a 6-inch male camlock plug on the opposite 45-degree angled bend. Engineered to sustain working pressures up to 75 PSI in ambient bulk liquid service, this high-flow directional fitting equips civil dewatering teams, agricultural irrigation operators, and industrial processing plants with instant, leak-free fluid routing.
Best Used For:
- High-Volume Civil Dewatering & Flood Bypass: Directing massive 6-inch suction and discharge hoses along gentle 45-degree angles to relieve mechanical stress and prevent severe bend fatigue.
- Bulk Agricultural Irrigation Systems: Connecting high-capacity distribution headers and mobile nurse tank transfer lines across uneven field terrain without pinching flow.
- Industrial Wastewater & Slurry Routing: Transitioning large-diameter male camlock pump discharge manifolds into quick-disconnect hose runs in tight mechanical bays.
Key Performance & Safety Features
- Direct Camlock-to-Camlock 45-Degree Jump: Coupler-to-adapter architecture eliminates cumbersome multi-piece elbow assemblies and extra threaded adapters, drastically minimizing potential leak points.
- Corrosion-Resistant Cast Aluminum Alloy: Delivers high tensile strength with minimal weight for easier field handling and superior resistance to environmental oxidation.
- Standard A-A-59326 / Mil-C-27487 Compliance: Guarantees 100% tool-free interchangeability with all standard commercial 6-inch cam and groove fittings across all manufacturers.
- Heavy-Duty Cam Arms & Buna-N Seal: Forged brass cam levers with stainless steel pivot pins compress a resilient Buna-N gasket for an instant, pressure-tight seal.
- Gradual 45-Degree Internal Radius: Contoured interior flow path reduces line friction, minimizes fluid turbulence, and prevents pressure drop during high-volume pumping.
What's Included
- (1) Seal Fast 6-Inch Type DA Aluminum Female Coupler x Male Adapter 45-Degree Cam and Groove Elbow (DA600AL45)
- (2) Pre-Installed Forged Brass Cam Arms with Stainless Steel Pivot Pins and Pull Rings
- (1) Factory-Installed High-Resilience Nitrile (Buna-N) Gasket
Technical Specifications
| Specification | Detail |
|---|---|
| Model Number / Part ID | DA600AL45 (Camlock 45-Degree Elbow) |
| Coupling Configuration Type | Type DA (Female Coupler x Male Adapter) |
| Nominal Fitting Size | 6.00 in (6 in / 152.4 mm) |
| Elbow Bend Angle | 45 Degrees (Gradual Bend) |
| End Connection 1 (Inlet) | 6.00 in Female Cam and Groove Coupler |
| End Connection 2 (Outlet) | 6.00 in Male Cam and Groove Adapter |
| Body Construction Material | Cast Aluminum Alloy (ASTM-Equivalent) |
| Cam Arm & Pin Materials | Forged Brass Levers / Stainless Steel Pins |
| Gasket Material | Buna-N (Nitrile Rubber) |
| Maximum Working Pressure | 75 PSI at 70°F (Ambient Rating) |
| Industry Manufacturing Standards | A-A-59326 / Commercial MIL-C-27487 Specs |
| Compatible Media Fluids | Water, Industrial Wastewater, Hydraulic Oil, Diesel |
| Approximate Unit Weight | 8.90 lbs (4.04 kg) |
Pro-Tip: When coupling large 6-inch camlock fittings under heavy line weight, support the hose assembly on both sides before closing the cam arms; aligning the coupling horizontally ensures the Buna-N gasket seats uniformly without pinching.