Spotnails Headless Pins 23020 1-1/4 Inch 23 Gauge 10000 Count (Micro Pin Fastener Invisible Finish Trim Woodworking Carpentry Tool)

Spotnails 23020 1-1/4-Inch 23-Gauge Headless Micro Pins (10,000-Count Contractor Box)

The Spotnails 23020 1-1/4-Inch 23-Gauge Headless Micro Pins secure delicate decorative trim moldings, picture frames, fine cabinetry joints, and wood veneers without leaving visible surface fastener marks. Manufactured from high-tensile fine wire with a precise chisel penetration point, these headless pins leave a tiny entry hole that virtually disappears into the wood grain, eliminating hours of putty filling and sanding. Engineered with strict dimensional tolerances for jam-free feeding in 23-gauge pneumatic and electric pin nailers, this 10,000-count master box delivers reliable holding power across fine woodworking and furniture assembly shops.

Best Used For:

• Fine Cabinetry & Molding Installation: Fastening fragile decorative trim, intricate wood carvings, and quarter-round moldings without splitting thin timber profiles.
• Picture Frame & Wood Veneer Glue-Ups: Pinning mitered picture frame corners and holding delicate wood veneers securely in place while wood glue cures.
• Invisible Fastener Assembly: Securing small hobby components and intricate millwork where surface nail heads would ruin the aesthetic finish.

Key Performance & Safety Features

• Ultra-Fine 23-Gauge Profile: Extremely thin micro-pin wire creates a near-invisible entry point, removing the need for wood filler or putty.
• Precision Chisel Point Geometry: Sharp entry points pierce hard and soft woods cleanly without causing grain splitting along narrow edges.
• Consistent Feed Strip Collation: Uniform straightening prevents strip fragmentation and eliminates frustrating tool jams inside pin nailer magazines.
• Optimal 1-1/4-Inch Length: Provides deep enough penetration for secure temporary holding strength in light-duty framing and trim applications.
• High-Volume 10,000-Count Box: Bulk contractor packaging ensures uninterrupted production workflow across long woodworking projects.

What's Included

• (1) Master Carton of 10,000 Spotnails 23020 23-Gauge 1-1/4" Headless Micro Pins

Technical Specifications

Pro-Tip: Set your pin nailer regulator to approximately 70 to 80 PSI when driving 23-gauge micro pins into hardwoods; lower pressure prevents the tiny pins from buckling inside the driver blade slot while sinking flush into the wood surface.