Spotnails Siding Coil Nails CPD7D099RG 2-1/4 Inch x 0.099 (0 Degree Plastic Strip Ring Shank Galvanized 7200 Count Duo-Fast Compatible Tool)

Spotnails CPD7D099RG 2-1/4-Inch x 0.099-Inch 0-Degree Plastic Collated Galvanized Ring Shank Siding Nails

The Spotnails CPD7D099RG 2-1/4-Inch x 0.099-Inch 0-Degree Plastic Collated Siding Nails provide high-capacity withdrawal resistance for exterior fiber cement siding, cedar lap boards, structural wall sheathing, and wood fencing. Manufactured from high-tensile steel wire with an annular ring shank profile and electro-galvanized zinc coating, these fasteners interlock with wood fibers to prevent nail backing caused by structural vibration and thermal timber expansion. The flat 0-degree plastic collation strips feed continuously without jamming across Duo-Fast and compatible industrial coil siding nailers.

Best Used For:

• Exterior Lap & Fiber Cement Siding: Blind-nailing and face-nailing composite lap siding and cedar shakes to exterior framing studs with maximum wind-load hold.
• Structural Wall & Roof Sheathing: Securing 3/8-inch to 5/8-inch OSB panels and plywood subflooring without head pull-through or nail popping.
• Wood Fencing & Exterior Trim: Fastening treated picket boards and decorative corner boards to prevent cupping and moisture-related fastener loosening.

Key Performance & Safety Features

• Annular Ring Shank Geometry: Raised ring ribs interlock deeply with wood timber fibers, delivering up to double the withdrawal resistance of smooth shank fasteners.
• Corrosion-Resistant Galvanized Coating: Electro-galvanized zinc protective barrier shields high-carbon steel against exterior humidity, moisture, and rust staining.
• 0-Degree Flat Plastic Collation: Flexible plastic carrier strip ensures jam-free magazine cycling and leaves zero stinging wire flagging on the finished wood surface.
• Full Round Drive Head: Broad circular head distributes bearing pressure evenly across siding boards to eliminate surface over-penetration.
• Duo-Fast Tool Compatibility: Formatted specifically for Duo-Fast CW-series and interchangeable 0-degree pneumatic coil siding nailers.
• 7,200-Count Bulk Packaging: Commercial jobsite quantity minimizes reloading frequency and reduces fastener cost per square.

What's Included

• (1) 7,200-Count Box of Spotnails CPD7D099RG 2-1/4-Inch x 0.099-Inch 0-Degree Plastic Collated Galvanized Ring Shank Nails

Technical Specifications

Pro-Tip: Adjust your pneumatic tool drive-depth guide so the full round head rests precisely flush against the siding surface; overdrive breaks the exterior board barrier and reduces wind-shear holding values.