SpotNails Pneumatic Pinner SP2340 23 Gauge The Striker 1/2 Inch to 1-9/16 Inch Micro Pin Nailer (80-100 PSI Invisible Finish Cabinetry Trim)

SpotNails SP2340 The Striker 23-Gauge 1/2-Inch to 1-9/16-Inch Micro Pin Nailer

The SpotNails SP2340 "The Striker" 23-Gauge Micro Pin Nailer is a high-precision pneumatic finishing tool engineered to fasten intricate trim, pre-finished moldings, and cabinet components with minimal surface intrusion. Operating at 80 to 100 PSI, this 2.56-pound air-powered pinner drives headless micro pins ranging from 1/2 inch to 1-9/16 inches long from a 100-pin capacity magazine. Designed for cabinet makers, finish carpenters, and woodworkers, this lightweight tool solves wood splitting, nail hole putty filling, and sanding downtime during delicate final assembly.

Best Used For:

• Delicate Pre-Finished Molding Attachment: Securing scribe molding, beadboard, and ornamental trim without splitting fine hardwoods or leaving large nail holes.
• Custom Cabinetry & Raised Panel Assembly: Pinning delicate cabinet face frames, decorative overlays, and crown molding corners prior to adhesive cure.
• Picture Frame & Furniture Manufacturing: Holding mitered joints and thin veneered wood components firmly in place with headless micro pins.

Key Performance & Safety Features

• Ultra-Fine 23-Gauge Fastening: Leaves an entry hole so small it eliminates wood filling, putty application, and surface sanding on pre-finished trim.
• 1/2-Inch to 1-9/16-Inch Fastener Range: Accommodates headless micro pins from 1/2 inch up to 1-9/16 inches (12mm to 40mm) for varying material thicknesses.
• Adjustable Depth-of-Drive Mechanism: Allows precise countersinking or flush pin seating to match delicate softwood or dense hardwood densities.
• Quick-Clear Nosepiece Assembly: Enables rapid clearing of rare fastener jams to minimize jobsite downtime during production runs.
• 100-Pin Capacity Rear-Load Magazine: Holds full sticks of 23-gauge pins for extended firing cycles between reloads.
• Ergonomic Lightweight Construction: Weighs only 2 lbs. 9 oz. with a contoured rubber grip for maximum maneuverability in tight cabinet interiors.

What's Included

• (1) SpotNails SP2340 "The Striker" 23-Gauge Micro Pin Nailer
• (1) Protective Plastic Carrying Storage Case
• (1) Pair of Clear Safety Glasses

Available for pickup at our Tomball, TX location:

30702 State Highway 249
Tomball, Texas 77375

Monday-Friday 7am-5pm CST
Saturday 7am-1pm CST

Technical Specifications

Pro-Tip: Apply a small drop of pneumatic tool oil into the 1/4-inch air inlet before each use to keep internal O-rings lubricated and maintain consistent driver blade strike force.