Spotnails Pneumatic Nailer VRN45 7/8 to 1-3/4 Inch Coil Roofing (120 Nail Capacity 0.120 Shank Bump Fire Asphalt Shingle Siding Framing Tool)

Spotnails VRN45 The Striker Pneumatic Coil Roofing Air Nailer

The Spotnails VRN45 Coil Roofing Air Nailer fastens fiberglass asphalt shingles, rigid insulation board, roof underlayment, and exterior cedar shakes across residential and commercial roofing structures. Engineered with a rapid-response contact actuation bump-fire valve operating at 80 to 100 PSI, this 5.6-lb pneumatic tool drives 0.120-inch shank wire-collated roofing nails in lengths ranging from 7/8 inch to 1-3/4 inches. The high-capacity 120-nail magazine integrates tool-free depth-of-drive adjustment and a 360-degree rotatable exhaust deflector to ensure flush, wind-resistant fastener seating on steep-pitch roof decks.

Best Used For:

• Asphalt & Architectural Shingle Installation: Securing 3-tab and laminated dimensional fiberglass shingles to 1/2-inch and 5/8-inch roof sheathing decking at production speed.
• Rigid Foam & Insulation Board Attachment: Fastening polyisocyanurate roof insulation panels and waterproofing membranes with wide-head roofing nails without crushing substrate surfaces.
• Exterior Sidewall Siding & Sheathing: Nailing wood shakes, siding underlayment, and structural wall sheathing boards in high-volume exterior construction.

Key Performance & Safety Features

• High-Speed Contact Bump Actuation: Enables continuous, repetitive driving cycles along roofing courses to maximize crew square-per-hour productivity.
• Tool-Free Drive Depth Adjustment: Precision wheel sets nail depth accurately to prevent shingle blow-through or exposed proud nail heads.
• Lightweight 5.6-lb Die-Cast Body: Compact, well-balanced chassis reduces overhead shoulder strain and arm fatigue during all-day roof installations.
• 120-Nail High-Capacity Canister: Accepts standard 15-degree wire-collated roofing coils to minimize jobsite reloading downtime.
• 360-Degree Multi-Directional Exhaust: Directs compressor exhaust and lubricating oil mist away from the contractor and steep roof walking paths.
• Carbide-Tipped Nose & Steel Wear Plates: Shields the magnesium nosepiece against severe shingle grit abrasion and jobsite roof deck scuffing.

What's Included

• (1) Spotnails VRN45 Pneumatic Coil Roofing Nailer (The Striker)
• (1) Heavy-Duty Molded Plastic Carrying Case
• (1) Industrial Safety Glasses
• (1) Pneumatic Tool Lubricating Oil Bottle
• (1) Owner's Manual and Schematic Parts Diagram

Technical Specifications

Pro-Tip: Calibrate the depth-of-drive dial on a scrap piece of shingle and decking at 90 PSI so the nail head sits flush with the shingle surface without cutting into the fiberglass reinforcement matting.