SpotNails Pneumatic Air Hose HP14100C 1/4 Inch x 100 Foot Polyurethane Compressor Line (200 PSI Field Repairable Brass NPT Fittings Orange)
Couldn't load pickup availability
SpotNails 1/4-Inch x 100-Foot Polyurethane 200 PSI Air Hose Kit
The SpotNails Polyurethane Air Hose is a 100-foot pneumatic supply line constructed from reinforced polyurethane rated for a 200 PSI maximum working pressure with a 4 to 1 safety burst ratio, weighing over 40% less than conventional rubber hoses. Designed for framing contractors and trim carpenters operating pneumatic nailers and staplers, this 1/4-inch diameter line maintains jobsite flexibility from -40°F to +150°F while featuring field-repairable 1/4-inch NPT solid brass fittings that enable instant on-site hose splices if punctured.
Best Used For:
- Residential Framing and Sheathing: Supplying continuous compressed air to high-production pneumatic framing nailers across multi-story scaffolding.
- Finish Carpentry and Interior Trim: Dragging lightweight supply line across finished flooring and subfloor layouts without scuffing decorative moldings or causing user fatigue.
- Roofing and Exterior Siding: Operating high-pressure coil nailers on steep roof pitches with a high-visibility orange line that resists dragging abrasion.
Key Performance & Safety Features
- Ultra-Lightweight Polyurethane Construction: Over 40% lighter than standard rubber hoses to significantly reduce drag weight and operator arm fatigue.
- All-Weather Temperature Flexibility: Engineered to remain pliable and non-kinking in sub-zero working conditions from -40°F up to +150°F ambient heat.
- Field Repairable Fittings: Reusable solid brass hose ends permit rapid, on-site splices and repairs using basic hand tools if the hose is damaged.
- Heavy-Duty Strain Relief: Integrated flexible bend restrictors prevent hose kinking and premature failure at primary NPT connection points.
- Industrial Pressure Performance: Certified for a 200 PSI working pressure rating backed by a robust 4 to 1 burst safety factor.
- Abrasion-Resistant Jacket: Tough exterior jacket protects the inner reinforcement braid when dragged across rough concrete, gravel, and jobsite debris.
What's Included
- (1) SpotNails HP14100C 1/4 in. x 100 ft. Reinforced Polyurethane Air Hose (High-Visibility Orange)
- (1) 1/4 in. NPT Industrial Ball Brass Coupler
- (1) 1/4 in. NPT Steel Plug
Technical Specifications
| Brand Manufacturer | SpotNails |
| Model Number | HP14100C |
| Hose Length | 100 ft. |
| Hose Inner Diameter | 1/4 in. |
| Material Construction | Reinforced Polyurethane |
| Hose Color | High-Visibility Safety Orange |
| Maximum Working Pressure | 200 PSI |
| Burst Safety Factor | 4 to 1 (800 PSI Burst) |
| Fitting Size & Type | 1/4 in. NPT Solid Brass |
| Operating Temperature Range | -40°F to +150°F |
| Repair Feature | Field-Repairable Hose Ends |
| Strain Relief | Dual Rubber Bend Restrictors |
Pro-Tip: If the hose suffers an accidental puncture on the jobsite, cut out the damaged section squarely with a utility knife and re-tighten the field-repairable brass fitting collar directly onto the fresh hose end to resume operation in under two minutes.