Spotnails Sheathing Staples 6612PG-10M 1-1/2 Inch Leg Crown Fasteners (16 Gauge 7/16 Crown Galvanized Chisel Point OSB Plywood Deck Subfloor)

Spotnails 6612PG-10M 1-1/2" 16-Gauge 7/16" Medium Crown Galvanized Sheathing Staples (10,000-Count Box)

The Spotnails 6612PG-10M 1-1/2-inch 16-gauge galvanized sheathing staples anchor oriented strand board (OSB), structural plywood wall sheathing, roof decking, and subflooring into dimensional framing lumber. Engineered to fit Senco P-style pneumatic staplers and matching medium-crown nailers, these commercial-grade fasteners feature sharp symmetrical chisel points that drive true through dense wood fibers without tracking offline or causing grain blowout. Outfitted with an electro-galvanized zinc barrier to resist jobsite corrosion and weathering, high-tensile 16-gauge steel wire, and a broad 7/16-inch crown profile delivering extensive surface clamping area, they equip framing contractors, residential homebuilders, and commercial roofers with code-compliant structural holding power across high-volume production builds.

Best Used For:

• Exterior Wall Sheathing and Shear Wall Bracing: Fastening 7/16-inch and 1/2-inch OSB or plywood exterior panels directly to wall studs in accordance with structural building codes.
• Roof Decking and Subfloor Installation: Securing subfloor panels and plywood roof decks flush over joists and rafters to prevent floor squeaks and board uplift.
• Crate Assembly and Pallet Manufacturing: Fastening thick wood components and industrial crating sheathing rapidly during high-production packaging runs.

Key Performance & Safety Features

• Electro-Galvanized Zinc Barrier: Protective zinc plating shields the steel wire against atmospheric moisture, oxidation, and wood acid corrosion.
• Broad 7/16" Medium Crown: Wide crown configuration spans wide surface areas to prevent thin sheathing panel pull-through under structural shear loads.
• Sharp Chisel Point Tips: Precision-beveled tips ensure straight, balanced penetration into hardwood and framing timber while minimizing wood splitting.
• Senco P-Pattern Engineering: Optimized collation strips feed smoothly through all standard Senco P-style medium-crown pneumatic tools without feeding jams.
• High-Tensile 16-Gauge Steel: Robust wire gauge provides high shear strength and pull-out resistance under heavy dynamic frame stress.
• Pro Contractor 10,000-Count Bulk Pack: High-volume packaging minimizes reload downtime and maximizes jobsite framing efficiency across large projects.

What's Included

• (1) Box of Spotnails 6612PG-10M 1-1/2-Inch 16-Gauge Galvanized Sheathing Staples (10,000 Staples Total)

Technical Specifications

Pro-Tip: Adjust your pneumatic stapler drive depth so the 7/16-inch crown seats completely flush with the top surface of the sheathing without breaking through the outer veneer layer; countersinking the crown into plywood or OSB weakens the joint shear strength and can violate residential building inspection codes.