Tsurumi Trash Pump HSE2.4S 2 Inch Automatic Electric Submersible Dewatering Tool (0.5 HP 115V Single Phase Electrode Sensor Shaft Mounted Agitator)

Industrial-Grade 0.5 HP Submersible Trash Pump with Intelligent Electrode Water Level Sensor, Shaft-Mounted Solids Agitator, and Patented Mechanical Oil Lifter

The Tsurumi Automatic Electric Submersible Trash Pump 2 Inch Discharge 1/2 HP 115V Heavy Duty Dewatering Tool with Agitator HSE2.4S delivers specialized high-solid fluid displacement utility and exceptional wastewater extraction efficiency across active construction trenches and flooded building basins. Engineered with a robust 0.5 HP single-phase motor profile that operates natively on standard 115V electrical lines, this high-performance layout instrument utilizes a specialized shaft-mounted mechanical agitator to suspend settled sand, silt, and slurry particles up to 0.276 inches in diameter. This contractor-grade dewatering solution resolves frequent impeller clogging blockages, premature motor burnouts from dry running cycles, and mechanical tethered float switch failures by combining solid urethane rubber wear components with an intelligent internal Auto Relay electrode liquid sensor matrix and patented oil lifter seal lubrication technology. Outfitted with an angled 2-inch male NPT discharge port fitting, an extended 32-foot commercial power supply cable layout, and a thermal protector safety cutoff, this robust utility configuration optimizes subcontractor jobsite throughput during heavy trench clearing runs, municipal vault drainage, and emergency commercial basement remediation loops.

Best Used For:

• Slurry Excavation Dewatering: Pumping thick, sediment-heavy runoff out of raw foundation pits where settled sand and gravel blockages stall traditional utility pumps.
• Automated Level Maintenance: Managing continuous workspace water levels in drainage sumps without the physical entanglement tracking hazards of legacy tethered float switches.
• Deep Vault Clearance Staging: Routing the long 32-foot electrical cable down into industrial utility manholes or elevator shafts to evacuate stagnant fluid accumulations cleanly.

Key Performance & Safety Features

• Electrode Auto Relay System: Solid-state level-sensing electrode switch detects liquid presence to run automatically, conserving energy and protecting the tool from dry operations.
• Shaft-Mounted Solid Agitator: Cast metal internal agitator spins at high velocity to actively liquefy dense sludge layers, keeping incoming fluid matrices flowing freely.
• Patented Oil Lifter Architecture: Mechanical oil lifter mechanism forces internal lubrication along double mechanical shaft seal faces, safeguarding internal motors during low-oil layouts.
• Urethane Rubber Protection: High-resistance semi-vortex urethane rubber impeller configuration handles abrasive suspended sediments without losing primary hydraulic tracking specs.
• Angled Male NPT Fitting: Directional 2-inch male NPT outlet interface minimizes layout hose kinking, speeding up subcontractor assembly times on-site.

What's Included

• (1) Tsurumi HSE2.4S Automatic Submersible Trash Pump Base Assembly
• (1) Integrated 32-Foot Heavy-Duty Power Cable Shell

Technical Specifications

Pro-Tip: When deploying this dewatering tool, wipe down the level-sensing probe rod with a clean shop towel between project stages. Removing micro layers of mineral scaling or thick grease sludge prevents tracking errors, keeping the solid-state auto relay firing at exact water line benchmarks.