Tsurumi Submersible Dewatering Pump LSR2.4S 2 Inch Electric Puddle Sucker (2/3 HP 62 GPM 39 Foot Head 115V Low Level Basement Flat Surface Tool)

Tsurumi LSR2.4S 2" 2/3 HP Low-Level Electric Submersible Dewatering Pump

The Tsurumi LSR2.4S 2-inch low-level electric submersible dewatering pump evacuates standing water down to a 0.4-inch continuous liquid depth across flooded commercial basements, residential slabs, and flat concrete construction decks. Driven by a 2/3 HP 115V single-phase motor drawing 6.1 amps, this 23.1-lb low-profile utility pump moves up to 62 GPM (3,720 GPH) with a maximum total dynamic head of 39 feet while passing small abrasive particles up to 0.236 inches. Constructed with an abrasive-resistant urethane semi-vortex impeller, dual inside Silicon Carbide mechanical shaft seals in an isolated oil chamber, an integrated miniature thermal motor protector, and an extra-long 32-foot power cable, it provides flood remediation crews and utility contractors with reliable, continuous shallow water evacuation without motor overheating.

Best Used For:

• Flooded Basement and Slab Flood Remediation: Extracting residual standing water off flat concrete floors down to 0.4 inches to prevent structural wood decay and mold proliferation.
• Commercial Flat Roof and Deck Dewatering: Draining accumulated rainwater pools and shallow surface runoff across flat commercial roofs, parking decks, and elevated concrete forms.
• Utility Vault and Manhole Clearing: Evacuating shallow groundwater pools, sediment-laden runoff, and maintenance sumps quickly using the extended 32-foot grounded power cord.

Key Performance & Safety Features

• 0.4-Inch Low-Level Suction Clearance: Specially engineered base plate pulls shallow water down to 0.4 inches from flat surfaces without losing prime.
• Urethane Semi-Vortex Impeller: High-durability urethane rubber formulation resists harsh sand abrasion and maintains consistent flow dynamics during slurry pumping.
• Dual Inside Silicon Carbide Mechanical Seals: Premium SiC seal faces encased in an isolated lubricant chamber protect against friction heat and motor fluid ingress.
• Built-In Miniature Thermal Motor Protector: Automatically shuts down power during electrical overload, locked impeller, or dry-run conditions to prevent coil burnout.
• High-Volume 62 GPM Output: Discharges 3,720 gallons per hour through a standard 2-inch port to rapidly clear floodwater from critical jobsite paths.
• 32-Foot Heavy-Duty Power Cord: Extended water-resistant rubber cable provides wide reach across deep basements and outdoor basins without requiring hazardous extension cords.

What's Included

• (1) Tsurumi LSR2.4S-61 2/3 HP Low-Level Submersible Dewatering Pump
• (1) 32-Foot Heavy-Duty Molded Power Cable with Strain Relief
• (1) 2-Inch NPT Discharge Hose Adapter Coupling
• (1) Integrated Ergonomic Rubberized Carrying Handle

Technical Specifications

Pro-Tip: Prime the bottom suction casing with a small cup of water before placing it onto thin puddle films; pre-wetting the chamber creates an instant suction vacuum seal to draw water down to the 0.4-inch mark immediately.